Skip to content
Fitly Parts
FP-E0463308

6-Pack Side Brushes compatible with iRobot Roomba i2, Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8

6-Pack Side Brushes for iRobot Roomba i6
No reviews yet
6-packRobot Vacuum Parts
Skill levelEasy · no tools, a few minutes

These brushes help keep your robot vacuum operating at peak performance by sweeping edges and corners.

Key facts

Part type
Side Brush
Included
6-pack
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Irobot: Flip the robot over. The model and serial are on the label under the bin or on the bottom of the robot.

General manufacturer guidance: exact label position can vary by model.

Side Brush specifications

Material
Plastic
Replacement Cycle
1 - 3 months

Installation guide - Replacing a brush

General guidance for this part type - always follow your device manual
Tools
  • Small screwdriver, only if the brush is screwed on
Tips
  • Side brushes are often marked L and R; fitting them on the wrong side makes them flick dirt away.
  1. 1Switch off. Power the device down (robot vacuums: main switch off) and turn it over onto a soft surface.
  2. 2Remove the old brush. Pull it straight off its post, or undo the single screw at its center.
  3. 3Clean the post. Remove wrapped hair and fluff from the post and around it; hair here makes a brush slow down.
  4. 4Fit the new brush. Press it on, matching the left and right markings (L/R) if your brushes have them, and refit any screw.
  5. 5Check it spins. Turn the brush by hand to confirm it rotates freely before running the device.

Read the full guide: How to Replace Robot Vacuum Side Brushes →

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

Full replacement guide
  1. 01Bristles are bent, frayed or missing
  2. 02Robot leaves debris along edges and corners
  3. 03Brush does not spin or wobbles

More parts for iRobot Roomba i3

See all iRobot Roomba i3 parts
12 Side Brushes compatible with iRobot Roomba e5, Roomba e6, Roomba e7, Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7, Roomba j7 PlusFP-1A8D98×12
Fits 10 models
For iRobot Roomba e5, Roomba e6
Side Brushes 12 e5, e6, e7, i3, i4, i6, i7, i8, j7
$21.99
Main Brush, Side Brush, and HEPA Filter Kit compatible with iRobot Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7FP-3025C8
Fits 6 models
For iRobot Roomba i3, Roomba i4
Main Brush, Side and HEPA Filter Kit i3, i4, i6, i7, i8, j7
$21.99
9 HEPA Filters compatible with iRobot Roomba e5, Roomba e6, Roomba e7, Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7, Roomba j7 PlusFP-71BF49×9
Fits 10 models
For iRobot Roomba e5, Roomba e6
HEPA Filters 9 e5, e6, e7, i3, i4, i6, i7, i8, j7
$29.99
HEPA Filter (4 Pack) compatible with iRobot Roomba i3, Roomba i6, Roomba i7, Roomba i8FP-74255F×4
Fits 4 models
For iRobot Roomba i3, Roomba i6
HEPA Filter i3, i6, i7, i8
$17.99
Side Brush compatible with iRobot Roomba i3, Roomba i7FP-8C138D×1
Fits 2 models
For iRobot Roomba i3, Roomba i7
Side Brush i3, i7
$9.99
Maintenance Kit compatible with iRobot Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7FP-8DD07D
Fits 6 models
For iRobot Roomba i3, Roomba i4
Maintenance Kit i3, i4, i6, i7, i8, j7
$24.99
HEPA Filter and Side Brush Kit compatible with iRobot Roomba e5, Roomba i3FP-9527F1
Fits 2 models
For iRobot Roomba e5, Roomba i3
HEPA Filter and Side Brush Kit e5, i3
$15.99
Vacuum Brush and Filter Kit compatible with iRobot Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7FP-B51AD9
Fits 6 models
For iRobot Roomba i3, Roomba i4
Vacuum Brush and Filter Kit i3, i4, i6, i7, i8, j7
$27.99
6 HEPA Filters compatible with iRobot Roomba e5, Roomba e6, Roomba e7, Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7, Roomba j7 PlusFP-C26662×6
Fits 10 models
For iRobot Roomba e5, Roomba e6
HEPA Filters 6 e5, e6, e7, i3, i4, i6, i7, i8, j7
$26.99
Dust Bag compatible with iRobot Roomba i3FP-CA6DE8×1
For iRobot Roomba i3
Dust Bag i3
$9.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this side brush fit?

Our team verified it for iRobot Roomba i6, iRobot Roomba i8, iRobot Roomba i4, iRobot Roomba i7, iRobot Roomba i2, iRobot Roomba i3. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.

+What's in the box?

Pack size: 6-pack, as listed for this part. Check the photos and specifications for the exact contents.

+What is the side brush made of?

Listed material: Plastic.

+Is it hard to install?

Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$10.99
1