Vacuum Brush and Filter Kit compatible with iRobot Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7

More than just the part
Included in the price- 2 Pairs Roller Brushes
- 10 Side Brushes
- 8 HEPA Filters
- 1 Screwdriver
- 1 Cleaning Tool
Made from high-strength, environmentally friendly materials to block 99% of dust and allergens.
Key facts
- Part type
- Replenishment Kit
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Irobot | iRobot Roomba i6 | Fits |
| iRobot Roomba i8 | Fits | |
| iRobot Roomba i4 | Fits | |
| iRobot Roomba i7 | Fits | |
| iRobot Roomba j7 | Fits | |
| iRobot Roomba i3 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Irobot: Flip the robot over. The model and serial are on the label under the bin or on the bottom of the robot.
General manufacturer guidance: exact label position can vary by model.
Replenishment Kit specifications
- Material
- Plastic / Rubber / HEPA Filter
- Included Components
- 2 Pairs Roller Brushes, 10 Side Brushes, 8 HEPA Filters, 1 Screwdriver, 1 Cleaning Tool
- Filtration Capability
- 0.3 micrometer particles
- Dust Box Capacity
- 0.6-1 L (Supported)
Installation guide - Installing a parts kit
General guidance for this part type - always follow your device manual- As needed for the individual parts
- Photograph each step as you take things apart; it makes reassembly much easier.
- 1Switch off and unplug. Power the device down and disconnect it.
- 2Check the contents. Lay out the kit and compare it with the pack list on this page.
- 3Replace one part at a time. Swap each part completely before starting the next, so nothing gets mixed up.
- 4Keep the old parts. Hold on to them until the device runs normally with the new ones.
- 5Test. Run a short cycle and listen for unusual noise before regular use.
Read the full guide: How to Replace a Vacuum Roller (Main Brush) →
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Suction or airflow is weaker
- 02Filter looks clogged, grey or damaged
- 03Unusual odors during use
More parts for iRobot Roomba i3
See all iRobot Roomba i3 parts
FP-1A8D98×12
FP-3025C8
FP-66A76D
FP-71BF49×9
FP-C26662×612 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this replenishment kit fit?
Our team verified it for iRobot Roomba i6, iRobot Roomba i8, iRobot Roomba i4, iRobot Roomba i7, iRobot Roomba j7, iRobot Roomba i3. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: Set, as listed for this part. Check the photos and specifications for the exact contents.
+What is the replenishment kit made of?
Listed material: Plastic / Rubber / HEPA Filter.
+Is it hard to install?
Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.






