HEPA Filter and Side Brush Kit compatible with iRobot Roomba e5, Roomba i3

Replacement HEPA filters and side brushes for iRobot Roomba E, I, and J series robot vacuums. These maintenance parts help reduce dust and pollen while keeping your vacuum at peak performance. Recommended replacement every 1-3 months.
Key facts
- Part type
- Filters And Side Brushes
- Included
- 1 kit
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Irobot | iRobot Roomba e5 | Fits |
| iRobot Roomba i3 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Irobot: Flip the robot over. The model and serial are on the label under the bin or on the bottom of the robot.
General manufacturer guidance: exact label position can vary by model.
Filters And Side Brushes specifications
- Vacuum Part Type
- Filters
Installation guide - Replacing a filter
General guidance for this part type - always follow your device manual- No tools required in most cases
- Do not wash a filter unless it is marked washable; wet HEPA media stops filtering.
- If the filter does not sit flush, stop and recheck the model on this page.
- 1Switch off and unplug. Power the device down and unplug it.
- 2Open the filter compartment. It is usually behind a front or back cover, or inside the dustbin on vacuums. Your manual shows the exact spot.
- 3Remove the old filter. Note how it sat, especially any airflow arrow or rubber seal facing the motor. Tap dust off into a bag outdoors.
- 4Fit the new filter. Take off all plastic wrap, seat it the same way round until it sits flush with its seal fully in contact, and never force it.
- 5Close and test. Close the cover, run the device and check for normal sound and airflow. Reset the filter reminder if your device has one.
Read the full guide: How to Replace an Air Purifier HEPA Filter →
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Bristles are bent, frayed or missing
- 02Robot leaves debris along edges and corners
- 03Brush does not spin or wobbles
More parts for iRobot Roomba e5
See all iRobot Roomba e5 parts
FP-1A8D98×12
FP-71BF49×9
FP-C26662×6More parts for iRobot Roomba i3
See all iRobot Roomba i3 parts
FP-3025C8
FP-66A76D
FP-B51AD912 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this filters and side brushes fit?
Our team verified it for iRobot Roomba e5, iRobot Roomba i3. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 1 kit, as listed for this part. Check the photos and specifications for the exact contents.
+Is it hard to install?
Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.





