Skip to content
Fitly Parts
FP-8DD07D6E

Maintenance Kit compatible with iRobot Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7

Maintenance Kit for iRobot Roomba i6
No reviews yet
Robot Vacuum Parts

More than just the part

Included in the price
  • 2 Pairs Roller Brushes
  • 10 Side Brushes
  • 8 HEPA Filters
  • 1 Screwdriver
  • 1 Cleaning Brush
Skill levelAdvanced · mechanical experience needed

High-performance replacement kit featuring dual multi-surface rubber brushes, side brushes, and HEPA filters. Designed to capture 99.7% of dust and allergens while maintaining optimal cleaning performance. Easy to install and constructed from high-strength, eco-friendly materials.

Key facts

Part type
Maintenance Kit
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Irobot: Flip the robot over. The model and serial are on the label under the bin or on the bottom of the robot.

General manufacturer guidance: exact label position can vary by model.

Maintenance Kit specifications

Material
Plastic / Rubber
HEPA Filtration
Down to 0.3 micrometers
Package Contents
2 Pairs Roller Brushes, 10 Side Brushes, 8 HEPA Filters, 1 Screwdriver, 1 Cleaning Brush

Installation guide - Installing a parts kit

General guidance for this part type - always follow your device manual
Tools
  • As needed for the individual parts
Tips
  • Photograph each step as you take things apart; it makes reassembly much easier.
  1. 1Switch off and unplug. Power the device down and disconnect it.
  2. 2Check the contents. Lay out the kit and compare it with the pack list on this page.
  3. 3Replace one part at a time. Swap each part completely before starting the next, so nothing gets mixed up.
  4. 4Keep the old parts. Hold on to them until the device runs normally with the new ones.
  5. 5Test. Run a short cycle and listen for unusual noise before regular use.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

More parts for iRobot Roomba i3

See all iRobot Roomba i3 parts
12 Side Brushes compatible with iRobot Roomba e5, Roomba e6, Roomba e7, Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7, Roomba j7 PlusFP-1A8D98×12
Fits 10 models
For iRobot Roomba e5, Roomba e6
Side Brushes 12 e5, e6, e7, i3, i4, i6, i7, i8, j7
$21.99
Main Brush, Side Brush, and HEPA Filter Kit compatible with iRobot Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7FP-3025C8
Fits 6 models
For iRobot Roomba i3, Roomba i4
Main Brush, Side and HEPA Filter Kit i3, i4, i6, i7, i8, j7
$21.99
9 HEPA Filters compatible with iRobot Roomba e5, Roomba e6, Roomba e7, Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7, Roomba j7 PlusFP-71BF49×9
Fits 10 models
For iRobot Roomba e5, Roomba e6
HEPA Filters 9 e5, e6, e7, i3, i4, i6, i7, i8, j7
$29.99
HEPA Filter (4 Pack) compatible with iRobot Roomba i3, Roomba i6, Roomba i7, Roomba i8FP-74255F×4
Fits 4 models
For iRobot Roomba i3, Roomba i6
HEPA Filter i3, i6, i7, i8
$17.99
Side Brush compatible with iRobot Roomba i3, Roomba i7FP-8C138D×1
Fits 2 models
For iRobot Roomba i3, Roomba i7
Side Brush i3, i7
$9.99
HEPA Filter and Side Brush Kit compatible with iRobot Roomba e5, Roomba i3FP-9527F1
Fits 2 models
For iRobot Roomba e5, Roomba i3
HEPA Filter and Side Brush Kit e5, i3
$15.99
Vacuum Brush and Filter Kit compatible with iRobot Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7FP-B51AD9
Fits 6 models
For iRobot Roomba i3, Roomba i4
Vacuum Brush and Filter Kit i3, i4, i6, i7, i8, j7
$27.99
6 HEPA Filters compatible with iRobot Roomba e5, Roomba e6, Roomba e7, Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8, Roomba j7, Roomba j7 PlusFP-C26662×6
Fits 10 models
For iRobot Roomba e5, Roomba e6
HEPA Filters 6 e5, e6, e7, i3, i4, i6, i7, i8, j7
$26.99
Dust Bag compatible with iRobot Roomba i3FP-CA6DE8×1
For iRobot Roomba i3
Dust Bag i3
$9.99
6-Pack Side Brushes compatible with iRobot Roomba i2, Roomba i3, Roomba i4, Roomba i6, Roomba i7, Roomba i8FP-E04633×6
Fits 6 models
For iRobot Roomba i2, Roomba i3
6-Pack Side Brushes i2, i3, i4, i6, i7, i8
$10.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this maintenance kit fit?

Our team verified it for iRobot Roomba i6, iRobot Roomba i8, iRobot Roomba i4, iRobot Roomba i7, iRobot Roomba j7, iRobot Roomba i3. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.

+What's in the box?

Pack size: Set, as listed for this part. Check the photos and specifications for the exact contents.

+What is the maintenance kit made of?

Listed material: Plastic / Rubber.

+Is it hard to install?

Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$24.99
1