Side Brush 4-Pack compatible with Roborock Q Revo, Q5, Q7, Q7 Max, Q8 Max, S5, S5 Max, S6, S6 Pure, S7, S7 Max Ultra, S7 MaxV, S8, S8 Plus, S8 Pro Ultra
Replacement side brushes for Roborock robot vacuums. Designed to sweep edges and corners into the cleaning path. This set includes 4 side brushes made of ABS plastic.
Key facts
- Part type
- Side Brush
- Included
- 4-pack
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Roborock | Roborock S8 Plus | Fits |
| Roborock S8 | Fits | |
| Roborock Q Revo | Fits | |
| Roborock Q5 | Fits | |
| Roborock S6 | Fits | |
| Roborock S8 Pro Ultra | Fits | |
| Roborock S6 Pure | Fits | |
| Roborock Q7 Max | Fits | |
| Roborock S5 Max | Fits | |
| Roborock S7 | Fits | |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Roborock: Lift the top cover. The model label is beside the dustbin; also on the bottom of the robot.
General manufacturer guidance: exact label position can vary by model.
Side Brush specifications
- Material
- ABS Plastic
Installation guide - Replacing a brush
General guidance for this part type - always follow your device manual- Small screwdriver, only if the brush is screwed on
- Side brushes are often marked L and R; fitting them on the wrong side makes them flick dirt away.
- 1Switch off. Power the device down (robot vacuums: main switch off) and turn it over onto a soft surface.
- 2Remove the old brush. Pull it straight off its post, or undo the single screw at its center.
- 3Clean the post. Remove wrapped hair and fluff from the post and around it; hair here makes a brush slow down.
- 4Fit the new brush. Press it on, matching the left and right markings (L/R) if your brushes have them, and refit any screw.
- 5Check it spins. Turn the brush by hand to confirm it rotates freely before running the device.
Read the full guide: How to Replace Robot Vacuum Side Brushes →
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Bristles are bent, frayed or missing
- 02Robot leaves debris along edges and corners
- 03Brush does not spin or wobbles
More parts for Roborock Q Revo
See all Roborock Q Revo parts
More parts for Roborock Q5
See all Roborock Q5 parts
More parts for Roborock Q7
See all Roborock Q7 parts
FP-A3956C×112 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this side brush fit?
Our team verified it for Roborock S8 Plus, Roborock S8, Roborock Q Revo, Roborock Q5, Roborock S6, Roborock S8 Pro Ultra and 9 more. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 4-pack, as listed for this part. Check the photos and specifications for the exact contents.
+What is the side brush made of?
Listed material: ABS Plastic.
+Is it hard to install?
Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.