Main Roller Brush 6-Pack compatible with Roborock Q Revo, Q Revo MaxV, Q Revo S
These durable plastic brushes help maintain optimal cleaning performance by effectively agitating floor surfaces.
Key facts
- Part type
- Main Roller Brush
- Included
- 6-pack
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Roborock | Roborock Q Revo | Fits |
| Roborock Q Revo S | Fits | |
| Roborock Q Revo MaxV | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Roborock: Lift the top cover. The model label is beside the dustbin; also on the bottom of the robot.
General manufacturer guidance: exact label position can vary by model.
Main Roller Brush specifications
- Material
- Plastic
- Quantity
- 6 Pieces
Installation guide - Replacing a roller / main brush
General guidance for this part type - always follow your device manual- No tools required in most cases
- A roller that does not spin freely is usually seated wrong at one end; remove and refit it.
- 1Switch off. Power the device down and turn it over onto a soft surface.
- 2Open the brush cover. Press the release tabs (usually two) and lift the cover off.
- 3Remove the old roller. Lift it out, noting how its square or shaped end sits in the drive and how the end caps sit in their slots.
- 4Clean the housing. Remove hair and threads from the housing and the roller's end bearings.
- 5Fit and check. Insert the new roller with its ends in the same slots, close the cover and turn the roller by hand to confirm it spins freely.
Read the full guide: How to Replace a Vacuum Roller (Main Brush) →
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Hair and debris left on the floor
- 02Bristles are worn, flattened or missing
- 03Brush does not spin or makes a clicking noise
More parts for Roborock Q Revo
See all Roborock Q Revo parts
More parts for Roborock Q Revo MaxV
See all Roborock Q Revo MaxV parts
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this main roller brush fit?
Our team verified it for Roborock Q Revo, Roborock Q Revo S, Roborock Q Revo MaxV. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 6-pack, as listed for this part. Check the photos and specifications for the exact contents.
+What is the main roller brush made of?
Listed material: Plastic.
+Is it hard to install?
Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.