Skip to content
Fitly Parts
FP-CE93D88D

Mop Tray Holders 2-Pack compatible with Dreame L10s Ultra Gen2, L30s Ultra

Mop Tray Holders for Dreame L30s Ultra
No reviews yet
2-packRobot Vacuum Parts
Exact version: Dreame L10s Ultra Gen2
Skill levelEasy · no tools, a few minutes

These holders provide a secure attachment point for mop cloths to ensure effective floor scrubbing. Made from durable plastic, they are essential for maintaining your vacuum's mopping functionality.

Key facts

Part type
Mop Tray Holder
Included
2-pack
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
DreameDreame L30s Ultra Fits
Dreame L10s Ultra Gen2Gen2 Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Dreame: Usually on a sticker under the main body, near the battery or under the dustbin.

General manufacturer guidance: exact label position can vary by model.

Mop Tray Holder specifications

Material
ABS Plastic
Quantity
2 Mop Trays

Installation guide - Replacing a mop pad

General guidance for this part type - always follow your device manual
Tools
  • No tools required
Tips
  • Wash reusable pads before first use to remove manufacturing residue.
  1. 1Switch off. Power the device down and empty the water tank if the pad plate comes off with it.
  2. 2Remove the old pad. Peel it off the hook and loop plate, or slide it out of its rails.
  3. 3Fit the new pad. Lay it flat with no folds, lined up with the plate edges.
  4. 4Refit and test. Refit the plate or tank and run a short cycle to check the pad wets and wipes evenly.

Read the full guide: How to Replace Robot Vacuum Mop Pads →

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

Full replacement guide
  1. 01Pad is stained, smelly or no longer absorbs water
  2. 02Fabric is thin, torn or matted
  3. 03Streaks left on the floor

More parts for Dreame L10s Ultra Gen2

See all Dreame L10s Ultra Gen2 parts
HEPA Filters compatible with Dreame L10s Ultra Gen2, L30s Ultra (10 Pack)FP-0AE262×10
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
HEPA Filters L10s Gen2, L30s
$32.99
Side Brush compatible with Dreame L10s Ultra Gen2, L30s Ultra (4-Pack)FP-21B391 Best seller×4
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Side Brush L10s Gen2, L30s
$9.99
10 Side Brushes compatible with Dreame L10s Ultra Gen2, L30s UltraFP-2EF843×10
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Side Brushes 10 L10s Gen2, L30s
$13.99
Dust Bags compatible with Dreame L10s Ultra Gen2, L30s UltraFP-3272DF×6
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Dust Bags L10s Gen2, L30s
$22.99
Main Brush Cover Plate compatible with Dreame L10S, L10s Ultra Gen2, L30S, L30s UltraFP-3C9B15
Fits 4 models
For Dreame L10S, L10s Ultra Gen2
Main Brush Cover Plate L10S, Gen2, L30S
$12.99
20 Dust Bags compatible with Dreame L10s Ultra Gen2, L30s UltraFP-612A9E×20
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Dust Bags 20 L10s Gen2, L30s
$58.99
Mop Cloths compatible with Dreame L10s Ultra Gen2, L30s UltraFP-64CABE×4
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Mop Cloths L10s Gen2, L30s
$10.99
20 Mop Cloths compatible with Dreame L10s Ultra Gen2, L30s UltraFP-6F761F×20
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Mop Cloths 20 L10s Gen2, L30s
$33.99
12 Dust Bags compatible with Dreame L10s Ultra Gen2, L30s UltraFP-905598×12
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Dust Bags 12 L10s Gen2, L30s
5.0 (2)
$36.99
4 Rubber Main Brushes compatible with Dreame L10s Ultra Gen2, L30s UltraFP-CCB33A×4
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Rubber Main Brushes 4 L10s Gen2, L30s
$38.99
2 Rubber Main Brushes compatible with Dreame L10s Ultra Gen2, L30s UltraFP-D5D565×2
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Rubber Main Brushes 2 L10s Gen2, L30s
$21.99
HEPA Filters compatible with Dreame L10s Ultra Gen2, L30s Ultra (4 HEPA Filters)FP-FBE10B×4
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra (4 HEPA Filters)
HEPA Filters L10s Gen2, L30s 4
$13.99
10 Mop Cloths compatible with Dreame L10s Ultra Gen2, L30s UltraFP-FC936D×10
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Mop Cloths 10 L10s Gen2, L30s
$19.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this mop tray holder fit?

Our team verified it for Dreame L30s Ultra, Dreame L10s Ultra Gen2. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.

+What's in the box?

Pack size: 2-pack, as listed for this part. Check the photos and specifications for the exact contents.

+What is the mop tray holder made of?

Listed material: ABS Plastic.

+Is it hard to install?

Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$22.99
1