Skip to content
Fitly Parts
FP-D5D56592

Rubber Main Brushes 2 2-Pack compatible with Dreame L10s Ultra Gen2, L30s Ultra

2 Rubber Main Brushes for Dreame L30s Ultra
4 Rubber Main Brushs
No reviews yet
2-packRobot Vacuum Parts
Exact version: Dreame L10s Ultra Gen2
Skill levelEasy · no tools, a few minutes

The durable silicone and rubber construction helps prevent hair tangles while maintaining strong suction on various floor types.

Key facts

Part type
Main Roller Brush
Included
2-pack
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
DreameDreame L30s Ultra Fits
Dreame L10s Ultra Gen2Gen2 Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Dreame: Usually on a sticker under the main body, near the battery or under the dustbin.

General manufacturer guidance: exact label position can vary by model.

Main Roller Brush specifications

Material
Rubber, Silicone, Metal, ABS Plastic
Part Type
Main Brush
Compatibility
Dreame L10s Ultra Gen2 / L30s Ultra

Installation guide - Replacing a roller / main brush

General guidance for this part type - always follow your device manual
Tools
  • No tools required in most cases
Tips
  • A roller that does not spin freely is usually seated wrong at one end; remove and refit it.
  1. 1Switch off. Power the device down and turn it over onto a soft surface.
  2. 2Open the brush cover. Press the release tabs (usually two) and lift the cover off.
  3. 3Remove the old roller. Lift it out, noting how its square or shaped end sits in the drive and how the end caps sit in their slots.
  4. 4Clean the housing. Remove hair and threads from the housing and the roller's end bearings.
  5. 5Fit and check. Insert the new roller with its ends in the same slots, close the cover and turn the roller by hand to confirm it spins freely.

Read the full guide: How to Replace a Vacuum Roller (Main Brush) →

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

Full replacement guide
  1. 01Hair and debris left on the floor
  2. 02Bristles are worn, flattened or missing
  3. 03Brush does not spin or makes a clicking noise

More parts for Dreame L10s Ultra Gen2

See all Dreame L10s Ultra Gen2 parts
HEPA Filters compatible with Dreame L10s Ultra Gen2, L30s Ultra (10 Pack)FP-0AE262×10
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
HEPA Filters L10s Gen2, L30s
$32.99
Side Brush compatible with Dreame L10s Ultra Gen2, L30s Ultra (4-Pack)FP-21B391 Best seller×4
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Side Brush L10s Gen2, L30s
$9.99
10 Side Brushes compatible with Dreame L10s Ultra Gen2, L30s UltraFP-2EF843×10
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Side Brushes 10 L10s Gen2, L30s
$13.99
Dust Bags compatible with Dreame L10s Ultra Gen2, L30s UltraFP-3272DF×6
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Dust Bags L10s Gen2, L30s
$22.99
Main Brush Cover Plate compatible with Dreame L10S, L10s Ultra Gen2, L30S, L30s UltraFP-3C9B15
Fits 4 models
For Dreame L10S, L10s Ultra Gen2
Main Brush Cover Plate L10S, Gen2, L30S
$12.99
20 Dust Bags compatible with Dreame L10s Ultra Gen2, L30s UltraFP-612A9E×20
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Dust Bags 20 L10s Gen2, L30s
$58.99
Mop Cloths compatible with Dreame L10s Ultra Gen2, L30s UltraFP-64CABE×4
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Mop Cloths L10s Gen2, L30s
$10.99
20 Mop Cloths compatible with Dreame L10s Ultra Gen2, L30s UltraFP-6F761F×20
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Mop Cloths 20 L10s Gen2, L30s
$33.99
12 Dust Bags compatible with Dreame L10s Ultra Gen2, L30s UltraFP-905598×12
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Dust Bags 12 L10s Gen2, L30s
5.0 (2)
$36.99
4 Rubber Main Brushes compatible with Dreame L10s Ultra Gen2, L30s UltraFP-CCB33A×4
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Rubber Main Brushes 4 L10s Gen2, L30s
$38.99
Mop Tray Holders compatible with Dreame L10s Ultra Gen2, L30s UltraFP-CE93D8×2
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Mop Tray Holders L10s Gen2, L30s
$22.99
HEPA Filters compatible with Dreame L10s Ultra Gen2, L30s Ultra (4 HEPA Filters)FP-FBE10B×4
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra (4 HEPA Filters)
HEPA Filters L10s Gen2, L30s 4
$13.99
10 Mop Cloths compatible with Dreame L10s Ultra Gen2, L30s UltraFP-FC936D×10
Fits 2 models
For Dreame L10s Ultra Gen2, L30s Ultra
Mop Cloths 10 L10s Gen2, L30s
$19.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this main roller brush fit?

Our team verified it for Dreame L30s Ultra, Dreame L10s Ultra Gen2. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.

+What's in the box?

Pack size: 2-pack, as listed for this part. Check the photos and specifications for the exact contents.

+What is the main roller brush made of?

Listed material: Rubber, Silicone, Metal, ABS Plastic.

+Is it hard to install?

Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$21.99
1