Skip to content
Fitly Parts
FP-3CD8AB88

Main Brushes 4 4-Pack compatible with Dreame L40 Ultra, X40 Ultra

4 Main Brushes for Dreame L40 Ultra
2 Main Brushs
No reviews yet
4-packRobot Vacuum Parts
Skill levelEasy · no tools, a few minutes

Constructed from durable rubber and ABS plastic to effectively handle stains and pet hair on various floor types. Machine washable and reusable for long-lasting cleaning power.

Key facts

Part type
Main Roller Brush
Included
4-pack
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
DreameDreame L40 Ultra Fits
Dreame X40 Ultra Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Dreame: Usually on a sticker under the main body, near the battery or under the dustbin.

General manufacturer guidance: exact label position can vary by model.

Main Roller Brush specifications

Material
Rubber, Silicone, Metal, Fabric, ABS Plastic
Vacuum Part Type
Brushes
Quantity
4 pieces

Installation guide - Replacing a roller / main brush

General guidance for this part type - always follow your device manual
Tools
  • No tools required in most cases
Tips
  • A roller that does not spin freely is usually seated wrong at one end; remove and refit it.
  1. 1Switch off. Power the device down and turn it over onto a soft surface.
  2. 2Open the brush cover. Press the release tabs (usually two) and lift the cover off.
  3. 3Remove the old roller. Lift it out, noting how its square or shaped end sits in the drive and how the end caps sit in their slots.
  4. 4Clean the housing. Remove hair and threads from the housing and the roller's end bearings.
  5. 5Fit and check. Insert the new roller with its ends in the same slots, close the cover and turn the roller by hand to confirm it spins freely.

Read the full guide: How to Replace a Vacuum Roller (Main Brush) →

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

Full replacement guide
  1. 01Hair and debris left on the floor
  2. 02Bristles are worn, flattened or missing
  3. 03Brush does not spin or makes a clicking noise

More parts for Dreame L40 Ultra

See all Dreame L40 Ultra parts
20 Mop Cloths compatible with Dreame L40 Ultra, X40 UltraFP-0F56E8×20
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
Mop Cloths 20 L40, X40
$32.99
Dust Bags compatible with Dreame L40 Ultra, X40 Ultra (6 Pack)FP-32D205×6
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
Dust Bags L40, X40
$24.99
10 Mop Cloths compatible with Dreame L40 Ultra, X40 UltraFP-404B63×10
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
Mop Cloths 10 L40, X40
$22.99
Main Brush Cover Plate compatible with Dreame L40 Ultra, X40 UltraFP-61036E
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
Main Brush Cover Plate L40, X40
$16.99
Mop Trays compatible with Dreame L40 Ultra, X40 UltraFP-707600×2
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
Mop Trays L40, X40
$25.99
Side Brushes compatible with Dreame L40 Ultra, X40 Ultra (4 Pack)FP-7E5A16 Best seller×4
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
Side Brushes L40, X40
$10.99
10 Side Brushes compatible with Dreame L40 Ultra, X40 UltraFP-9A42FC×10
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
Side Brushes 10 L40, X40
$21.99
Main Roller Brushes compatible with Dreame L40 Ultra, X40 UltraFP-B0209C×2
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
Main Roller Brushes L40, X40
$25.99
Cutting Main Brush compatible with Dreame L40 Ultra, X40 UltraFP-C918D5
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
Cutting Main Brush L40, X40
$71.99
4 Side Brushes compatible with Dreame L40 Ultra, X40 UltraFP-D78EDD×4
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
Side Brushes 4 L40, X40
$12.99
12 Dust Bags compatible with Dreame L40 Ultra, X40 UltraFP-E0D0DE×12
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
Dust Bags 12 L40, X40
$38.99
10 HEPA Filters compatible with Dreame L40 Ultra, X40 UltraFP-E0DEC1×10
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
HEPA Filters 10 L40, X40
$32.99
4 HEPA Filters compatible with Dreame L40 Ultra, X40 UltraFP-E58AA2×4
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
HEPA Filters 4 L40, X40
$16.99
20 Dust Bags compatible with Dreame L40 Ultra, X40 UltraFP-F465FE×20
Fits 2 models
For Dreame L40 Ultra, X40 Ultra
Dust Bags 20 L40, X40
$58.99
Mop Cloths compatible with Dreame L40, L40 Ultra, X40 UltraFP-F9559A×4
Fits 3 models
For Dreame L40, L40 Ultra
Mop Cloths L40, X40
$13.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this main roller brush fit?

Our team verified it for Dreame L40 Ultra, Dreame X40 Ultra. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.

+What's in the box?

Pack size: 4-pack, as listed for this part. Check the photos and specifications for the exact contents.

+What is the main roller brush made of?

Listed material: Rubber, Silicone, Metal, Fabric, ABS Plastic.

+Is it hard to install?

Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$39.99
1