Water Filter compatible with Sage Barista Express, SES008, SES810, SES875, SES880, SES920, SES980, SES990
This single-pack filter helps maintain machine performance and beverage quality.
Key facts
- Part type
- Water Filter
- Included
- 1-pack
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Sage | Sage Barista Express | Fits |
| Sage SES880 | Fits | |
| Sage SES920 | Fits | |
| Sage SES875 | Fits | |
| Sage SES980 | Fits | |
| Sage SES008 | Fits | |
| Sage SES990 | Fits | |
| Sage SES810 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Sage: Usually on the rating plate under the machine or behind the water tank.
General manufacturer guidance: exact label position can vary by model.
Installation guide - Replacing a water filter
General guidance for this part type - always follow your device manual- Towel to catch drips
- Pitcher filters: rinse, seat firmly in the reservoir and discard the first fills.
- Discard the first ice batch after a filter change.
- 1Find the filter. Refrigerator filters sit inside the fridge (often top right), in the bottom grille or at the back. Put a towel underneath.
- 2Remove the old filter. Most turn a quarter turn counterclockwise and pull out; some release with a push button first.
- 3Fit the new filter. Remove its cap, line up the arrow with the mark on the housing, push it in and turn clockwise until it stops and locks.
- 4Flush the filter. Dispense water into a jug and discard it until it runs clear and steady. Spluttering at first is trapped air and is normal.
- 5Check and reset. Look for drips around the housing, then reset the filter light as your fridge manual describes.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Water or ice tastes or smells bad
- 02Water dispenser flow is slow
- 03Filter indicator light is on
- 04Ice cubes are small, cloudy or hollow
More parts for Sage Barista Express
See all Sage Barista Express parts
FP-3C20FF
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this water filter fit?
Our team verified it for Sage Barista Express, Sage SES880, Sage SES920, Sage SES875, Sage SES980, Sage SES008 and 2 more. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 1-pack, as listed for this part. Check the photos and specifications for the exact contents.
+Is it hard to install?
Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.