Titanium Conical Grinder Burr compatible with Breville Barista Express 870 878 860
These burrs stay sharp up to five times longer than standard steel and help reduce heat during the grinding process.
Key facts
- Part type
- Conical Grinder Burr
- Included
- Set
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Breville | Breville 860 | Fits |
| Breville 810 | Fits | |
| Breville 875 | Fits | |
| Breville 840 | Fits | |
| Breville 878 | Fits | |
| Breville Barista Express | Fits | |
| Breville 500 | Fits | |
| Breville 450 | Fits | |
| Breville 820 | Fits | |
| Breville 870 | Fits | |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Breville: On the rating plate under the machine; the model starts with "BES", "BKE", "BOV" etc.
- Sage: Usually on the rating plate under the machine or behind the water tank.
General manufacturer guidance: exact label position can vary by model.
Conical Grinder Burr specifications
- Material
- Metal (Titanium-coated)
- Shape
- 5-Point (Star-shaped)
- Color
- Gold
Installation guide - General replacement guidance
General guidance for this part type - always follow your device manual- Basic hand tools, only if your manual requires them
- If anything does not fit without force, stop and recheck the model on this page.
- Keep the old part until the new one is confirmed working.
- 1Switch off and unplug. Disconnect the device from power and let hot parts cool.
- 2Find the part. Check your device manual for the access panel, latches or screws; photograph each step as you go.
- 3Remove the old part. Note its orientation and any connectors, and release connectors by their plug body, never the wires.
- 4Compare and fit. Hold the old and new parts side by side, then fit the new one the same way round without forcing it.
- 5Reassemble and test. Refit covers, reconnect power and run a short test before regular use.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
More parts for Sage Barista Express
See all Sage Barista Express parts
FP-A4627A×1
More parts for Breville 870
See all Breville 870 parts
FP-007FD2
FP-0BF46B
FP-0F633F
FP-18D605
FP-2208FA
FP-27E0FD
FP-31A8DB
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this conical grinder burr fit?
Our team verified it for Breville 860, Breville 810, Breville 875, Sage 875, Sage Barista Express, Breville 840 and 13 more. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: Set, as listed for this part. Check the photos and specifications for the exact contents.
+What is the conical grinder burr made of?
Listed material: Metal (Titanium-coated).
+Is it hard to install?
Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.