USB Charging Port Dock Connector Flex Cable compatible with Apple iPhone 13
Replacement charging port flex cable featuring the USB dock connector and microphone. Resolves issues with charging connectivity, microphone clarity, and signal strength. Required professional installation recommended for optimal results.
Key facts
- Part type
- Charging Port Flex Cable
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Apple | Apple iPhone 13 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Apple: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.
General manufacturer guidance: exact label position can vary by model.
Charging Port Flex Cable specifications
- Connector Port
- USB Charging Sub Board
- Function
- Charging, Microphone, Signal, and Audio connection
- Color
- White (Match for device color)
Installation guide - Replacing an internal phone part
General guidance for this part type - always follow your device manual- Suction cup, opening picks and heat
- Precision screwdrivers
- Plastic spudger and tweezers
- New screen or back adhesive
- Many charging port flex cables also carry the microphones; make a test call before sealing the phone.
- Lay screws out on paper in the order they came out. Phone and laptop screws differ in length, and a long screw in the wrong hole can damage the board underneath.
- Never press a connector that is not lined up; bent pins are hard to repair.
- 1Open the phone. Switch it off with the battery below about 25%. iPhones open from the screen side, most Android phones from the back glass. Heat the edge, lift with a suction cup and cut the adhesive with a shallow pick.
- 2Disconnect the battery first. Remove the bracket over the battery connector and lift it with a plastic spudger before you unplug any other cable.
- 3Reach the part. Photograph each layer as you go. Remove the brackets and parts above it; a charging port flex often sits under the loudspeaker and vibration motor, and on many Android phones the port is a small board at the bottom under a plastic cover.
- 4Swap the part. Lift press fit connectors straight up with the spudger. Glued flex cables: warm them and peel slowly. Move rubber gaskets, mesh and brackets from the old part, and lay the new flex along the same path without sharp folds.
- 5Reconnect and test. Align each connector before pressing it down until it clicks, reconnect the battery last and test the part (charging, call audio, speaker, microphone, camera or buttons) before closing.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this charging port flex cable fit?
Our team verified it for Apple iPhone 13. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+Is it hard to install?
Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.