Shaver Head Blades 4-Pack compatible with Philips Series 2000; Philips Norelco 3000, 5000, S1020, S1050, S1060, Series 1000, SH30
Replacement shaver head blades for Philips Norelco electronic razors.
Key facts
- Part type
- Shaver Head Blade
- Included
- 4-pack
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Philips Norelco | Philips Norelco Series 1000 | Fits |
| Philips Norelco S1050 | Fits | |
| Philips Norelco 5000 | Fits | |
| Philips Norelco S1020 | Fits | |
| Philips Norelco SH30 | Fits | |
| Philips Norelco 3000 | Fits | |
| Philips Norelco S1060 | Fits | |
| Philips | Philips Series 2000 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Philips Norelco, Philips: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.
General manufacturer guidance: exact label position can vary by model.
Installation guide - Replacing a shaver head
General guidance for this part type - always follow your device manual- No tools required
- A new head can feel different for the first shaves while your skin adjusts.
- 1Switch off and clean. Turn the shaver off and rinse or brush out hair.
- 2Remove the old head. Foil shavers: press the side release buttons and lift the cassette off. Rotary shavers: open the head holder, release the retaining frame or rings and lift out the cutters.
- 3Clean the body. Brush hair out of the hair chamber and wipe the head mount.
- 4Fit the new head. Snap the cassette on until it clicks, or place each new cutter in its guard and refit the retaining frame.
- 5Reset and test. Reset the replacement reminder if your shaver has one (your manual shows how) and run it briefly.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Pulls or snags hair instead of cutting
- 02Takes more passes than before
- 03Skin irritation after use
- 04Blade is chipped or dull
More parts for Philips Series 2000
See all Philips Series 2000 parts
FP-746AA3×4More parts for Philips Norelco 3000
See all Philips Norelco 3000 parts
FP-0404CC
FP-07CEDA
FP-0A8C88
FP-0D1133
FP-364190
FP-492EC8
FP-49C073
FP-7A6502
FP-7B4E9D
FP-D0047C
FP-D486E312 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this shaver head blade fit?
Our team verified it for Philips Norelco Series 1000, Philips Norelco S1050, Philips Norelco 5000, Philips Norelco S1020, Philips Series 2000, Philips Norelco SH30 and 2 more. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 4-pack, as listed for this part. Check the photos and specifications for the exact contents.
+Is it hard to install?
Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.