Aug 30, 2026
Customer
Works well with 9000 series
FP-0404CC95
Mini Shaver Head compatible with Philips Series 5000; Philips Norelco 3000, 7000, 9000, Series 5000
5.0· 1 review
Hair Clipper Blades
Skill levelEasy · no tools, a few minutes
This mini foil shaver head attachment provides a clean, close finish for detailing and edging.
Key facts
- Part type
- Mini Shaver Head
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listedThis one part fits every model listed below. No need to open each model, just add this item to your cart.
| Parts for | Model | This part |
|---|---|---|
| Philips | Philips Series 5000 | Fits |
| Philips Norelco | Philips Norelco 9000 | Fits |
| Philips Norelco 7000 | Fits | |
| Philips Norelco Series 5000 | Fits | |
| Philips Norelco 3000 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Philips, Philips Norelco: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.
General manufacturer guidance: exact label position can vary by model.
Installation guide - Replacing a shaver head
General guidance for this part type - always follow your device manualTools
- No tools required
Tips
- A new head can feel different for the first shaves while your skin adjusts.
- 1Switch off and clean. Turn the shaver off and rinse or brush out hair.
- 2Remove the old head. Foil shavers: press the side release buttons and lift the cassette off. Rotary shavers: open the head holder, release the retaining frame or rings and lift out the cutters.
- 3Clean the body. Brush hair out of the hair chamber and wipe the head mount.
- 4Fit the new head. Snap the cassette on until it clicks, or place each new cutter in its guard and refit the retaining frame.
- 5Reset and test. Reset the replacement reminder if your shaver has one (your manual shows how) and run it briefly.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Pulls or snags hair instead of cutting
- 02Takes more passes than before
- 03Skin irritation after use
- 04Blade is chipped or dull
More parts for Philips Series 5000
See all Philips Series 5000 parts
FP-07CEDA Fits 5 models
5mm Trimmer Guide Comb 5000; 3000, 7000, 9000For Philips Series 5000; Philips Norelco 3000, 7000
$19.99
FP-0A8C88 Fits 5 models
T-Blade Trimmer Head 5000; 3000, 7000, 9000For Philips Series 5000; Philips Norelco 3000, 7000
$52.99
FP-0D1133 Fits 5 models
3mm Trimmer Guide Comb 5000; 3000, 7000, 9000For Philips Series 5000; Philips Norelco 3000, 7000
$19.99
FP-364190 Fits 5 models
Nose Trimmer Head 5000; 3000, 7000, 9000For Philips Series 5000; Philips Norelco 3000, 7000
$39.99
FP-492EC8 Fits 5 models
2mm Trimmer Guide Comb 5000; 3000, 7000, 9000For Philips Series 5000; Philips Norelco 3000, 7000
5.0 (8)
$21.99
FP-49C073 Fits 5 models
Steel Trimmer Blade 5000; 3000, 7000, 9000For Philips Series 5000; Philips Norelco 3000, 7000
$55.99
FP-7A6502 Fits 5 models
1mm Trimmer Guide Comb 5000; 3000, 7000, 9000For Philips Series 5000; Philips Norelco 3000, 7000
$20.99
FP-7B4E9D Fits 5 models
16mm Trimmer Guide Comb 5000; 3000, 7000, 9000For Philips Series 5000; Philips Norelco 3000, 7000
4.0 (2)
$20.99
FP-D0047C Fits 5 models
9mm Trimmer Guide Comb 5000; 3000, 7000, 9000For Philips Series 5000; Philips Norelco 3000, 7000
5.0 (1)
$19.99
FP-D486E3 Fits 5 models
7mm Trimmer Guide Comb 5000; 3000, 7000, 9000For Philips Series 5000; Philips Norelco 3000, 7000
$19.99
More parts for Philips Norelco 3000
See all Philips Norelco 3000 parts
FP-746AA3×4 Fits 8 models
Shaver Head Replacement Blades 2000; 3000, 5000, S1020, S1050, S1060, 1000, SH30For Philips Series 2000; Philips Norelco 3000, 5000
$13.99
FP-A20BFA×4 Fits 8 models
Shaver Head Blades 2000; 3000, 5000, S1020, S1050, S1060, 1000, SH30For Philips Series 2000; Philips Norelco 3000, 5000
$12.99
More parts for Philips Norelco 9000
See all Philips Norelco 9000 parts12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
5.01 review
51
40
30
20
10
| Rating | Reviewer | Review | Date |
|---|---|---|---|
| Customer | Works well with 9000 series | Aug 30, 2026 |
Questions & answers
+Which models does this mini shaver head fit?
Our team verified it for Philips Series 5000, Philips Norelco 9000, Philips Norelco 7000, Philips Norelco Series 5000, Philips Norelco 3000. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+Is it hard to install?
Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.
$50.99
1