Rear Tailgate Trunk Struts 2-Pack compatible with Toyota Sequoia 2008-2022 (Black)
These gas springs provide stable support and feature a plug-and-play installation without the need for drilling.
Key facts
- Part type
- Trunk Struts
- Included
- 2-pack
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Toyota | Toyota Sequoia | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Toyota: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.
General manufacturer guidance: exact label position can vary by model.
Trunk Struts specifications
- Extended Length
- 682mm
- Material
- Aluminum
- Placement on Vehicle
- Rear Left and Right
- Installation Method
- Plug and Play
- Item Weight
- 1.2kg
Installation guide - Replacing lift supports (gas struts)
General guidance for this part type - always follow your device manual- Prop rod, broom handle or a helper
- Small flat screwdriver
- Replace both struts together so the lid lifts evenly.
- Never puncture or heat an old gas strut; recycle it.
- 1Prop the lid. Engine off. Open the hood, trunk or tailgate fully and prop it securely, since it will drop once a strut is removed.
- 2Release the old strut. Lift the small spring clip on each end socket slightly with a flat screwdriver (do not pull it out) and pull that end off its ball stud.
- 3Check orientation. Fit the new strut the same way round as the old one; most are fitted with the thin rod end pointing down.
- 4Fit the new strut. Press each end onto its ball stud until it snaps on. Replace the second strut the same way.
- 5Test. Remove the prop and open and close the lid a few times to check it holds and closes smoothly.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Hood, trunk or liftgate will not stay open
- 02Lid drops slowly or must be held up
- 03Oil leaking from the strut
More parts for Toyota Sequoia
See all Toyota Sequoia parts
FP-6221E1×2
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this trunk struts fit?
Our team verified it for Toyota Sequoia. The full list is in the compatibility table above.
+Which model years does it fit?
Verified for model years 2008–2022. Check the year of your vehicle in the table above.
+How do I make sure it fits my exact model?
Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 2-pack, as listed for this part. Check the photos and specifications for the exact contents.
+Which side or position is it for?
Listed position: Rear Left and Right. Check the side before ordering; left and right parts differ.
+What is the trunk struts made of?
Listed material: Aluminum.
+Is it hard to install?
Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.