Rear Bumper Brake Light Assembly 2-Pack compatible with Mazda CX-5

This smoke-lens rear bumper light assembly features 3 functions: driving light, brake light, and turn signals.
Key facts
- Part type
- Rear Bumper Light Assembly
- Included
- 2-pack
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Mazda | Mazda CX-5 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Mazda: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.
General manufacturer guidance: exact label position can vary by model.
Rear Bumper Light Assembly specifications
- Color
- Smoke (Lens) / Red (LED)
- Voltage
- 12V
- Wattage
- 15W
- Brightness
- 800LM
- Material
- ABS + LED
- Functions
- Brake, Turn Signal, Driving Light
- Certification
- ECE
Installation guide - Replacing a tail light assembly
General guidance for this part type - always follow your device manual- Socket set or nut driver
- Plastic trim tool
- Masking tape
- Check for water marks in the trunk later; a gap in the gasket lets water in.
- 1Make it safe. Engine off, lights off. Open the trunk or tailgate.
- 2Reach the fixings. Remove the access cover or trim panel inside the trunk behind the lamp; the nuts are on the back of the lamp. Some lamps also have screws on the edge facing the open tailgate.
- 3Remove the old lamp. Unplug the connector by pressing its tab, undo the nuts and pull the lamp straight back. Put tape on the paint around the lamp first; ball clips need a firm, wiggling pull.
- 4Fit the new lamp. Move the bulbs across if the new lamp has none, check its gasket is seated, push it onto the studs and tighten the nuts snug, not hard, since the housing is plastic.
- 5Test every function. With a helper, check tail, brake, turn, reverse and hazard lights before refitting the trim.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
More parts for Mazda CX-5
See all Mazda CX-5 parts12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this rear bumper light assembly fit?
Our team verified it for Mazda CX-5. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 2-pack, as listed for this part. Check the photos and specifications for the exact contents.
+What voltage does it use?
Listed voltage: 12V. It must match the voltage of your original part.
+What is the rear bumper light assembly made of?
Listed material: ABS + LED.
+Does it have any certifications?
Listed certification: ECE, as stated by the manufacturer.
+Is it hard to install?
Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.





















