High Pressure Radiator Cap compatible with Mitsubishi Lancer Evolution, Outlander
Constructed from durable iron with a 15mm foot height (Big Size). Easy to install replacement for your vehicle's cooling system.
Key facts
- Part type
- Radiator Cap
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Mitsubishi | Mitsubishi Lancer Evolution | Fits |
| Mitsubishi Outlander | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Mitsubishi: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.
General manufacturer guidance: exact label position can vary by model.
Radiator Cap specifications
- Color
- Red
- Size
- Big Size (15mm Foot Height)
- Material
- Iron
- Weight
- 0.15kg
Installation guide - Replacing a radiator cap
General guidance for this part type - always follow your device manual- Rag
- Match the pressure rating stamped on the old cap.
- 1Let the engine cool. Switch the engine off and wait until it is completely cold. Never open a cap on a hot engine; the coolant is under pressure.
- 2Remove the old cap. Cover it with a rag, press down and turn it counterclockwise slowly to the first stop, let any pressure out, then remove it.
- 3Check the filler neck. Wipe the sealing surface clean and check the coolant level.
- 4Fit the new cap. Press it down and turn it clockwise until it locks fully.
- 5Check for leaks. Run the engine to normal temperature and look for seeping coolant around the cap.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Coolant leaks around the radiator neck or cap
- 02Coolant reservoir overflows or empties without a visible leak
- 03Engine runs hotter than normal
- 04Cracked or hardened rubber seal on the cap
More parts for Mitsubishi Lancer Evolution
See all Mitsubishi Lancer Evolution parts
More parts for Mitsubishi Outlander
See all Mitsubishi Outlander parts
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this radiator cap fit?
Our team verified it for Mitsubishi Lancer Evolution, Mitsubishi Outlander. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.
+What is the radiator cap made of?
Listed material: Iron.
+What are the dimensions?
Listed size: Big Size (15mm Foot Height). Measure your old radiator cap to compare.
+How much does it weigh?
Listed weight: 0.15kg.
+Is it hard to install?
Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.