Projector Lamp ELPLP67 compatible with Epson EB-S02, EB-S11, EB-S12, EB-W12, EB-W16, EB-X02, EB-X12, EB-X14, EH-TW550, EX3210, H494C, X14G
This replacement projector lamp module is designed to light up your projector quickly and reliably. It comes as a complete module for easy plug-and-play installation without requiring self-assembly.
Key facts
- Part type
- Projector Lamp
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Epson | EPSON EB-W12 | Fits |
| EPSON EB-S11 | Fits | |
| EPSON X14G | Fits | |
| EPSON EB-X02 | Fits | |
| EPSON H494C | Fits | |
| EPSON EB-S02 | Fits | |
| EPSON EB-X14 | Fits | |
| EPSON EB-S12 | Fits | |
| EPSON EB-X12 | Fits | |
| EPSON EX3210 | Fits | |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Epson: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.
General manufacturer guidance: exact label position can vary by model.
Projector Lamp specifications
- Warranty
- 180 days
- Installation
- Complete module, plug and play
Installation guide - Replacing a bulb / light unit
General guidance for this part type - always follow your device manual- Clean gloves or a cloth (for halogen bulbs)
- Match the bulb base, voltage and wattage printed on the old bulb.
- 1Switch off and unplug. Unplug the appliance and let the old bulb cool.
- 2Remove the cover. Unscrew or unclip the glass or plastic lens over the bulb.
- 3Remove the old bulb. Twist it counterclockwise, or pull it straight out for push in bulbs.
- 4Fit the new bulb. Handle halogen glass with a cloth only, since skin oils shorten its life, and seat it fully.
- 5Refit and test. Refit the cover, plug the appliance in and test the light.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
More parts for EPSON EB-S02
See all EPSON EB-S02 parts
FP-29A7FB12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this projector lamp fit?
Our team verified it for EPSON EB-W12, EPSON EB-S11, EPSON X14G, EPSON EB-X02, EPSON H494C, EPSON EB-S02 and 6 more. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+Is it hard to install?
Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.