Skip to content
Fitly Parts
FP-1FF5AAD3

58mm Coffee Distributor and Leveler compatible with Gaggia 58mm Portafilter

58mm Coffee Distributor and Leveler for Gaggia 58mm Portafilter
No reviews yet
Espresso Machine Parts
Skill levelModerate · basic hand tools

This 58mm espresso distribution tool features three angled slopes to consistently level coffee grounds for an even extraction. The adjustable palm tamper design allows you to set the desired tamping depth for repeatable precision.

Key facts

Part type
Coffee Distributor/leveler
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
GaggiaGaggia 58mm Portafilter Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Gaggia: Usually on the rating plate under the machine or behind the water tank.

General manufacturer guidance: exact label position can vary by model.

Coffee Distributor/leveler specifications

Material
Stainless Steel
Diameter
58mm
Design
3 Angled Slopes

Installation guide - General replacement guidance

General guidance for this part type - always follow your device manual
Tools
  • Basic hand tools, only if your manual requires them
Tips
  • If anything does not fit without force, stop and recheck the model on this page.
  • Keep the old part until the new one is confirmed working.
  1. 1Switch off and unplug. Disconnect the device from power and let hot parts cool.
  2. 2Find the part. Check your device manual for the access panel, latches or screws; photograph each step as you go.
  3. 3Remove the old part. Note its orientation and any connectors, and release connectors by their plug body, never the wires.
  4. 4Compare and fit. Hold the old and new parts side by side, then fit the new one the same way round without forcing it.
  5. 5Reassemble and test. Refit covers, reconnect power and run a short test before regular use.

Read the full guide: How to Fit a Replacement Portafilter →

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this coffee distributor/leveler fit?

Our team verified it for Gaggia 58mm Portafilter. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.

+What is the coffee distributor/leveler made of?

Listed material: Stainless Steel.

+What are the dimensions?

Listed size: 58mm. Measure your old coffee distributor/leveler to compare.

+Is it hard to install?

Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$13.99
1