Silicone Steam Ring (54mm) compatible with Breville 450
54mm silicone grouphead gasket replacement for Breville and Sage espresso machines. Made from BPA-free food grade silicone, it provides a high-temperature resistant seal for smooth operation.
Key facts
- Part type
- Grouphead Gasket
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Breville | Breville 450 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Breville: On the rating plate under the machine; the model starts with "BES", "BKE", "BOV" etc.
General manufacturer guidance: exact label position can vary by model.
Grouphead Gasket specifications
- Material
- Food Grade Silicone
- Size
- 54mm
- Temperature Resistance
- Up to 230°C / 450°F
Installation guide - Replacing a group head gasket
General guidance for this part type - always follow your device manual- Plastic pick or small flat screwdriver
- Brush and damp cloth
- A light smear of food grade silicone grease helps the seal seat.
- Still leaking: the groove may be scaled; descale and refit.
- 1Switch off and cool. Turn the machine off, unplug it and let the group head cool completely.
- 2Remove the shower screen. Undo its center screw (if present) and lift it off.
- 3Remove the old gasket. Pry it out with the pick, working round the edge; hard old gaskets may come out in pieces.
- 4Clean and fit. Scrub coffee residue and scale out of the groove, then press the new gasket in evenly with its flat side as the old one sat, and refit the shower screen.
- 5Test. Lock in the portafilter (it may feel stiff at first) and run water to check for drips round the seal.
Read the full guide: How to Replace an Espresso Machine Gasket or O-Ring →
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Water or coffee leaks around the seal
- 02Rubber is hard, cracked or flattened
- 03Loss of pressure or poor seal
More parts for Breville 450
See all Breville 450 parts
FP-0F633F
FP-27E0FD
FP-31A8DB
FP-3C20FF
FP-4BFC67
FP-5CE5A8
FP-6F5796
FP-816164
FP-85357E
FP-979814
FP-9BE790×1
FP-9E0CE9
FP-9FC81C
FP-A77BF7
FP-C7A376
FP-D1F423
FP-DD52CC
FP-F239A5
FP-F6978B12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this grouphead gasket fit?
Our team verified it for Breville 450. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What is the grouphead gasket made of?
Listed material: Food Grade Silicone.
+What are the dimensions?
Listed size: 54mm. Measure your old grouphead gasket to compare.
+Is it hard to install?
Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.