Whip, Hook, and Paddle Kit compatible with KitchenAid 5 Quart Stand Mixer (Hook Pulp Net)
Made from durable stainless steel, these tools help you efficiently prepare dough, frosting, mashed potatoes, and more.
Key facts
- Part type
- Attachment Kit
- Included
- 3-piece kit
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Kitchenaid | KitchenAid KSM152 | Fits |
| KitchenAid 5 Quart Tilt-Head Stand Mixer | Fits | |
| KitchenAid KSM155GB | Fits | |
| KitchenAid KSM15 | Fits | |
| KitchenAid Accolade 400 | Fits | |
| KitchenAid KSM95 | Fits | |
| KitchenAid KSM150PSER | Fits | |
| KitchenAid KSM75SL Classic Plus | Fits | |
| KitchenAid K45 | Fits | |
| KitchenAid KSM90 | Fits | |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Kitchenaid: Stand mixers: under the base. Large appliances: on the label inside the door frame or interior wall.
General manufacturer guidance: exact label position can vary by model.
Attachment Kit specifications
- Material
- Stainless Steel
- Includes
- 1 x 5K7SDH dough hook, 1 x K45WW wire whip, 1 x mixer aid paddle
- Application
- 5 Quart Tilt-Head Stand Mixers
Installation guide - Fitting a stand mixer attachment
General guidance for this part type - always follow your device manual- No tools required
- Wire whisks are not for stiff dough; use the dough hook.
- 1Switch off and unplug. Set the speed to off and unplug the mixer.
- 2Remove the old attachment. Raise the head or lower the bowl, push the attachment up and turn it to free its pin.
- 3Fit the new one. Slide it onto the shaft, push up and turn until the pin locks in the slot.
- 4Check the clearance. Make sure the beater clears the bowl bottom, using the adjustment check in your manual.
- 5Test. Start at the lowest speed with the bowl empty.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
More parts for KitchenAid KSM152
See all KitchenAid KSM152 parts
More parts for KitchenAid 5 Quart Tilt-Head Stand Mixer
See all KitchenAid 5 Quart Tilt-Head Stand Mixer parts
FP-92E337
FP-C839D2×3
FP-DF08A012 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this attachment kit fit?
Our team verified it for KitchenAid KSM152, KitchenAid 5 Quart Tilt-Head Stand Mixer, KitchenAid KSM155GB, KitchenAid KSM15, KitchenAid Accolade 400, KitchenAid KSM95 and 14 more. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 3-piece kit, as listed for this part. Check the photos and specifications for the exact contents.
+What is the attachment kit made of?
Listed material: Stainless Steel.
+Is it hard to install?
Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.