Waveguide Cover compatible with GE PEB7226DF2BB, ZEB1226SH1SS
This microwave waveguide cover shields the waveguide system from moisture and food particles to prevent sparking and arcing. Made from durable mica paper bonded with silicone resin, it includes two locking buttons for a secure installation.
Key facts
- Part type
- Waveguide Cover
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Ge | GE PEB7226DF2BB | Fits |
| GE ZEB1226SH1SS | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Ge: On the label inside the door frame, the interior wall, or behind the kick plate.
General manufacturer guidance: exact label position can vary by model.
Waveguide Cover specifications
- Material
- Mica paper with silicone resin
- Thickness
- 0.6 mm
- Part Number
- WB34X21271
- Includes
- 2 locking buttons (WB03X27704)
Installation guide - Replacing a microwave waveguide cover
General guidance for this part type - always follow your device manual- Small screwdriver, only if the cover is screwed
- Scissors, only for an uncut sheet
- Degreaser and cloth
- If sparking continues after a new cover and cleaning, stop using the microwave and have it serviced.
- 1Unplug the microwave. The cover sits inside the cooking cavity; never open the outer case, which holds high voltage parts.
- 2Remove the old cover. Pop it off its plastic clips or undo its screw, noting which way it faces.
- 3Clean the area. Degrease the wall and the opening behind the cover; burnt grease is what causes sparking.
- 4Fit the new cover. Cut an uncut sheet to the old cover's exact shape and holes, then fit it with the original clips.
- 5Test safely. Put a cup of water inside (never run the microwave empty) and run it briefly, watching for sparks.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this waveguide cover fit?
Our team verified it for GE PEB7226DF2BB, GE ZEB1226SH1SS. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What part numbers does it replace?
Listed reference numbers: WB34X21271. Compare them with the number on your old waveguide cover.
+What is the waveguide cover made of?
Listed material: Mica paper with silicone resin.
+Is it hard to install?
Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.