Skip to content
Fitly Parts
FP-3EA21F73

USB Charging Port Flex Cable with Microphone compatible with Apple iPhone 16 Plus

USB Charging Port Flex Cable with Microphone
5.0· 1 review
Phone Parts
Skill levelAdvanced · mechanical experience needed

Replacement USB charging port flex cable with integrated microphone. Ideal for repairing charger dock connector issues on your device.

Key facts

Part type
Charging Port Flex Cable
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
AppleApple iPhone 16 Plus Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Apple: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.

General manufacturer guidance: exact label position can vary by model.

Charging Port Flex Cable specifications

Use
USB Charging Dock
Component
Charging Port Connector
Design
Bar

Installation guide - Replacing an internal phone part

General guidance for this part type - always follow your device manual
Tools
  • Suction cup, opening picks and heat
  • Precision screwdrivers
  • Plastic spudger and tweezers
  • New screen or back adhesive
Tips
  • Many charging port flex cables also carry the microphones; make a test call before sealing the phone.
  • Lay screws out on paper in the order they came out. Phone and laptop screws differ in length, and a long screw in the wrong hole can damage the board underneath.
  • Never press a connector that is not lined up; bent pins are hard to repair.
  1. 1Open the phone. Switch it off with the battery below about 25%. iPhones open from the screen side, most Android phones from the back glass. Heat the edge, lift with a suction cup and cut the adhesive with a shallow pick.
  2. 2Disconnect the battery first. Remove the bracket over the battery connector and lift it with a plastic spudger before you unplug any other cable.
  3. 3Reach the part. Photograph each layer as you go. Remove the brackets and parts above it; a charging port flex often sits under the loudspeaker and vibration motor, and on many Android phones the port is a small board at the bottom under a plastic cover.
  4. 4Swap the part. Lift press fit connectors straight up with the spudger. Glued flex cables: warm them and peel slowly. Move rubber gaskets, mesh and brackets from the old part, and lay the new flex along the same path without sharp folds.
  5. 5Reconnect and test. Align each connector before pressing it down until it clicks, reconnect the battery last and test the part (charging, call audio, speaker, microphone, camera or buttons) before closing.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

More parts for Apple iPhone 16 Plus

See all Apple iPhone 16 Plus parts
Charging Port Dock Connector Flex compatible with Apple iPhone 16 PlusFP-6AB164×10
For Apple iPhone 16 Plus
Charging Port Dock Connector Flex 16
$18.99
4674mAh Battery compatible with Apple iPhone 16 PlusFP-7209F7
For Apple iPhone 16 Plus
4674mAh Battery 16
$47.99
Battery compatible with Apple iPhone 16 Plus (5100mAh)FP-885488
For Apple iPhone 16 Plus (5100mAh)
Battery 16 (5100mAh)
$63.99
Replacement Battery compatible with Apple iPhone 16 Plus (4674mAh)FP-A13C5C
For Apple iPhone 16 Plus (4674mAh)
Replacement Battery 16 (4674mAh)
$50.99
OLED Display and Touch Screen Digitizer compatible with Apple iPhone 16 PlusFP-AB9D44
For Apple iPhone 16 Plus
OLED Display and Touch Screen Digitizer 16
$95.99
5100mAh Replacement Battery compatible with Apple iPhone 16 PlusFP-B289EB
For Apple iPhone 16 Plus
5100mAh Replacement Battery 16
$60.99
Battery Cell compatible with Apple iPhone 16 PlusFP-B787DF
For Apple iPhone 16 Plus
Battery Cell 16
$44.99
Incell LCD Display and Digitizer compatible with Apple iPhone 16 PlusFP-BCDF53
For Apple iPhone 16 Plus
Incell LCD Display and Digitizer 16
$65.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

Mar 10, 2026
Customer

I'm satisfied~! The packaging arrived neatly~! I'm satisfied~! The packaging arrived neatly~! I really like it.

Questions & answers

+Which models does this charging port flex cable fit?

Our team verified it for Apple iPhone 16 Plus. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.

+Is it hard to install?

Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$22.99
1