Skip to content
Fitly Parts
FP-1013E531

Upstream Oxygen Sensor compatible with Nissan Note, Sentra

Upstream Oxygen Sensor for Nissan Note
No reviews yet
Oxygen Sensors
For Nissan Note +1 more
Skill levelAdvanced · mechanical experience needed

Replacement upstream and downstream oxygen sensor set (2 pieces) for easy installation and reliable performance.

Key facts

Part type
Oxygen Sensor
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
NissanNissan Note Fits
Nissan Sentra Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Nissan: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.

General manufacturer guidance: exact label position can vary by model.

Oxygen Sensor specifications

Part Number
234-9082
Part Number 2
234-4380

Installation guide - Replacing an engine or wheel sensor

General guidance for this part type - always follow your device manual
Tools
  • Socket set (oxygen sensors need an O2 sensor socket)
  • Penetrating oil
  • OBD2 scanner
Tips
  • If the same code returns, check the connector and wiring before suspecting the new sensor.
  1. 1Make it safe. Engine off and cool (exhaust parts stay hot for a long time). Raise the car on axle stands if the sensor is underneath.
  2. 2Follow the wire. Trace the sensor's wire to its connector, unplug it and unclip the wire from its holders, noting the route.
  3. 3Remove the old sensor. Soak rusty threads with penetrating oil first. Oxygen sensors unscrew with the O2 socket; wheel speed and crank sensors usually have one bolt and twist out. Clean rust from the mounting hole.
  4. 4Fit the new sensor. Keep anti-seize off an oxygen sensor's tip (new ones often come pre-coated on the threads). Lightly oil an O-ring, seat the sensor fully and route the wire through the original clips, away from hot or moving parts.
  5. 5Clear codes and test. Reconnect, clear the fault codes with an OBD2 scanner and drive to check the warning light stays off.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

  1. 01Check engine light is on with an oxygen sensor code
  2. 02Fuel economy drops
  3. 03Rough idle or hesitation
  4. 04Failed emissions test

More parts for Nissan Note

See all Nissan Note parts
Dual Iridium Spark Plug compatible with Nissan Altima, CUUBE, Micra, Note, Rogue, Sentra, TEANA, Versa, X-TrailFP-32C0B9×4
Fits 9 models
For Nissan Altima, CUUBE
Dual Iridium Spark Plug
$47.99
Dual Iridium Spark Plugs compatible with Nissan Cube, Juke, Micra, Note, Qashqai, Rogue, Sentra, Tiida, Versa, X-TrailFP-D7CB3E×4
Fits 10 models
For Nissan Cube, Juke
Dual Iridium Spark Plugs
$34.99

More parts for Nissan Sentra

See all Nissan Sentra parts
Engine Radiator Thermostat Housing compatible with Nissan Rogue Sport, SentraFP-15B9E3
Fits 2 models
For Nissan Rogue Sport, Sentra
Engine Radiator Thermostat Housing
$35.99
Camshaft Position Sensor compatible with Nissan Altima, Sentra, X-Trail T30FP-3CD0CE
Fits 3 models
For Nissan Altima, Sentra
Camshaft Position Sensor T30
$20.99
Ignition Coil Pack and Spark Plugs compatible with Nissan Altima, NV200, Sentra, VersaFP-69C646
Fits 4 models
For Nissan Altima, NV200
Ignition Coil Pack and Spark Plugs NV200
$82.99
Fuel Injection Throttle Body compatible with Nissan Cube, NV200, Sentra, Tiida, VersaFP-918081
Fits 5 models
For Nissan Cube, NV200
Fuel Injection Throttle Body NV200
$122.99
Ignition Coils and Iridium Spark Plugs compatible with Nissan Juke, Sentra 2011-2017FP-A1827E
Fits 2 models
For Nissan Juke, Sentra 2011-2017
Ignition Coils and Iridium Spark Plugs 2011-2017
$103.99
PCV Valve compatible with Nissan Altima, Juke, Murano, Pathfinder, Rogue, Sentra (Dark Grey)FP-AA9669
Fits 6 models
For Nissan Altima, Juke
PCV Valve
$9.99
Front Wheel Hub Assembly compatible with Nissan Rogue Select, SentraFP-E1636A
Fits 2 models
For Nissan Rogue Select, Sentra
Front Wheel Hub Assembly
$130.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this oxygen sensor fit?

Our team verified it for Nissan Note, Nissan Sentra. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.

+What part numbers does it replace?

Listed reference numbers: 234-9082. Compare them with the number on your old oxygen sensor.

+Is it hard to install?

Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.

+How fast will it arrive?

This part is in stock in the USA: delivery within 3 to 8 business days, free shipping in the US.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$70.99
1