Upper Dishrack Roller Assembly 8-Pack compatible with Kenmore Elite; LG LDS4821
Made from durable rubber, they ensure smooth operation of the dishwasher rack. Replaces part numbers 4581DD3002A and AP4437685.
Key facts
- Part type
- Upper Rack Roller Assembly
- Included
- 8-pack
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Lg | lg LDS4821 | Fits |
| Kenmore | Kenmore Elite | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Lg: On the label inside the door, on the side wall, or on the back of the appliance.
- Kenmore: Usually inside the door frame or on the back of the appliance.
General manufacturer guidance: exact label position can vary by model.
Upper Rack Roller Assembly specifications
- Material
- Rubber
- Replacement Numbers
- 4581DD3002A, AP4437685, 4581DD9001B, 1266813, AH3523050, EA3523050, PS3523050
Installation guide - Replacing a roller / main brush
General guidance for this part type - always follow your device manual- No tools required in most cases
- A roller that does not spin freely is usually seated wrong at one end; remove and refit it.
- 1Switch off. Power the device down and turn it over onto a soft surface.
- 2Open the brush cover. Press the release tabs (usually two) and lift the cover off.
- 3Remove the old roller. Lift it out, noting how its square or shaped end sits in the drive and how the end caps sit in their slots.
- 4Clean the housing. Remove hair and threads from the housing and the roller's end bearings.
- 5Fit and check. Insert the new roller with its ends in the same slots, close the cover and turn the roller by hand to confirm it spins freely.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Rack does not roll smoothly or drops off the rails
- 02Wheels are cracked or missing
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this upper rack roller assembly fit?
Our team verified it for lg LDS4821, Kenmore Elite. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 8-pack, as listed for this part. Check the photos and specifications for the exact contents.
+What is the upper rack roller assembly made of?
Listed material: Rubber.
+Is it hard to install?
Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.