Tumble Dryer Roller Tension Pulley Wheel for Bosch Siemens 00632045
Replacement tumble dryer roller tension belt pulley wheel. Essential for maintaining proper belt tension.
Key facts
- Part type
- Tension Belt Pulley Wheel
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Bosch | BOSCH WTA74200GB/02 | Fits |
| BOSCH WTA74200GB/05 | Fits | |
| BOSCH WTA74201AU/01 | Fits | |
| BOSCH WTA73200ES/01 | Fits | |
| BOSCH WTA74200FF/07 | Fits | |
| BOSCH WTA73200FF/01 | Fits | |
| BOSCH WTA73200FF/04 | Fits | |
| BOSCH WTA73201NL/01 | Fits | |
| BOSCH WTA73280/01 | Fits | |
| BOSCH WTA73200ES/03 | Fits | |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Bosch: Usually inside the door frame or on the back of the appliance.
General manufacturer guidance: exact label position can vary by model.
Installation guide - Replacing a drive belt
General guidance for this part type - always follow your device manual- Screwdriver for the access plate
- A new belt feels tight; that is normal and it beds in after a short run.
- 1Switch off and unplug. Disconnect power before touching any belt.
- 2Open the access plate. Remove the screws of the cover over the belt and photograph how the belt is routed.
- 3Remove the old belt. Slip it off the motor pulley first, then off the driven roller or pulley.
- 4Fit the new belt. Loop it over the motor pulley, then stretch it onto the second pulley following your photo.
- 5Check and close. Turn the belt by hand to center it and confirm nothing rubs, then refit the cover.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Brush roll stops spinning
- 02Burning rubber smell
- 03Belt is stretched, cracked or broken
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this tension belt pulley wheel fit?
Our team verified it for BOSCH WTA74200GB/02, BOSCH WTA74200GB/05, BOSCH WTA74201AU/01, BOSCH WTA73200ES/01, BOSCH WTA74200FF/07, BOSCH WTA73200FF/01 and 34 more. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+Is it hard to install?
Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.