Skip to content
Fitly Parts
FP-83ECAFB9

Tailgate Rear Trunk Lift Supports 2-Pack compatible with BMW Z4 E85

Tailgate Rear Trunk Lift Supports
No reviews yet
2-packTrunk Struts
For BMW Z4 E85
Skill levelModerate · basic hand tools

These gas-charged shocks feature a 250N force rating to restore smooth opening and closing of your vehicle's tailgate.

Key facts

Part type
Trunk Struts
Included
2-pack
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
BmwBMW Z4 E85 Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Bmw: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.

General manufacturer guidance: exact label position can vary by model.

Trunk Struts specifications

Extended Length
11.65"
Compressed Length
7.87"
Stroke Length
3.78"
Shaft Diameter
8 mm
Body Diameter
18 mm
Force
250N
Placement on Vehicle
Rear Left and Right

Installation guide - Replacing lift supports (gas struts)

General guidance for this part type - always follow your device manual
Tools
  • Prop rod, broom handle or a helper
  • Small flat screwdriver
Tips
  • Replace both struts together so the lid lifts evenly.
  • Never puncture or heat an old gas strut; recycle it.
  1. 1Prop the lid. Engine off. Open the hood, trunk or tailgate fully and prop it securely, since it will drop once a strut is removed.
  2. 2Release the old strut. Lift the small spring clip on each end socket slightly with a flat screwdriver (do not pull it out) and pull that end off its ball stud.
  3. 3Check orientation. Fit the new strut the same way round as the old one; most are fitted with the thin rod end pointing down.
  4. 4Fit the new strut. Press each end onto its ball stud until it snaps on. Replace the second strut the same way.
  5. 5Test. Remove the prop and open and close the lid a few times to check it holds and closes smoothly.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

  1. 01Hood, trunk or liftgate will not stay open
  2. 02Lid drops slowly or must be held up
  3. 03Oil leaking from the strut

More parts for BMW Z4 E85

See all BMW Z4 E85 parts

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this trunk struts fit?

Our team verified it for BMW Z4 E85. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.

+What's in the box?

Pack size: 2-pack, as listed for this part. Check the photos and specifications for the exact contents.

+Which side or position is it for?

Listed position: Rear Left and Right. Check the side before ordering; left and right parts differ.

+Is it hard to install?

Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.

+How fast will it arrive?

This part is in stock in the USA: delivery within 3 to 8 business days, free shipping in the US.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$55.99
1