Steam Release Valve and Sealing Ring compatible with Instant Pot Duo Evo PLus 60, IP-Pro 60
More than just the part
Included in the price- 1 Sealing ring
- 1 Steam Release Valve
- 2 O-Rings
- 1 Float Valve
- 3 Float Valve Caps
- 1 Anti-Block Shield
Complete replacement kit for 6-quart pressure cookers, including a steam release valve, sealing ring, and float valve components.
Key facts
- Part type
- Steam Release Valve And Sealing Ring Kit
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Instant Pot | Instant Pot Duo Evo PLus 60 | Fits |
| Instant Pot IP-Pro 60 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Instant Pot: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.
General manufacturer guidance: exact label position can vary by model.
Steam Release Valve And Sealing Ring Kit specifications
- Material
- Metal, Rubber
- Compatibility
- 6 Qt Models
- Package Includes
- 1 Sealing ring, 1 Steam Release Valve, 2 O-Rings, 1 Float Valve, 3 Float Valve Caps, 1 Anti-Block Shield
Installation guide - Replacing a group head gasket
General guidance for this part type - always follow your device manual- Plastic pick or small flat screwdriver
- Brush and damp cloth
- A light smear of food grade silicone grease helps the seal seat.
- Still leaking: the groove may be scaled; descale and refit.
- 1Switch off and cool. Turn the machine off, unplug it and let the group head cool completely.
- 2Remove the shower screen. Undo its center screw (if present) and lift it off.
- 3Remove the old gasket. Pry it out with the pick, working round the edge; hard old gaskets may come out in pieces.
- 4Clean and fit. Scrub coffee residue and scale out of the groove, then press the new gasket in evenly with its flat side as the old one sat, and refit the shower screen.
- 5Test. Lock in the portafilter (it may feel stiff at first) and run water to check for drips round the seal.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Water or coffee leaks around the seal
- 02Rubber is hard, cracked or flattened
- 03Loss of pressure or poor seal
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this steam release valve and sealing ring kit fit?
Our team verified it for Instant Pot Duo Evo PLus 60, Instant Pot IP-Pro 60. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 1 kit, as listed for this part. Check the photos and specifications for the exact contents.
+What is the steam release valve and sealing ring kit made of?
Listed material: Metal, Rubber.
+Is it hard to install?
Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.