Rubber Gaskets with Removal Hook compatible with Ninja BL663
These white silicone seal rings have an outer diameter of 3.23 inches.
Key facts
- Part type
- Rubber Gaskets
- Included
- 3 gaskets + 1 hook
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Ninja | Ninja BL663 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Ninja: Usually on the rating plate under the machine or behind the water tank.
General manufacturer guidance: exact label position can vary by model.
Rubber Gaskets specifications
- Material
- Silicone
- Thickness
- 1mm
- Outer Diameter
- 3.23in
Installation guide - Replacing a gasket / seal
General guidance for this part type - always follow your device manual- Plastic pick or flat tool to lift the old seal
- Compare the old and new seal side by side before fitting; shape and size must match.
- 1Switch off and cool. Unplug the appliance and let hot parts cool.
- 2Remove the old seal. Lift it gently with a plastic pick, noting how it sits in its groove and which side faces out.
- 3Clean the groove. Remove all residue so the new seal can seat evenly.
- 4Fit the new seal. Press it in evenly in the same orientation, with no twists or stretching.
- 5Test for leaks. Reassemble and run with water first to check for leaks.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Water or coffee leaks around the seal
- 02Rubber is hard, cracked or flattened
- 03Loss of pressure or poor seal
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this rubber gaskets fit?
Our team verified it for Ninja BL663. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 3 gaskets + 1 hook, as listed for this part. Check the photos and specifications for the exact contents.
+What is the rubber gaskets made of?
Listed material: Silicone.
+Is it hard to install?
Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.