Rear Ceramic Brake Pads compatible with Honda CB 1000 R, CB1000, VFR 800 F ABS, VFR 800 FD Interceptor DLX, VFR 800 X Crossrunner ABS, VFR800, VFR800F
These pads offer high temperature resistance (0 to 400°C), low noise, and excellent anti-dust capability for various road conditions.
Key facts
- Part type
- Rear Brake Pads
- Included
- 1 pair
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Honda | Honda VFR800F | Fits |
| Honda CB1000 | Fits | |
| Honda VFR800 | Fits | |
| Honda VFR 800 F ABS | Fits | |
| Honda CB 1000 R | Fits | |
| Honda VFR 800 FD Interceptor DLX | Fits | |
| Honda VFR 800 X Crossrunner ABS | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Honda: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.
General manufacturer guidance: exact label position can vary by model.
Rear Brake Pads specifications
- Material
- Ceramic Fibre
- Rear Size
- 100 x 40 x 9mm
- Temperature Resistance
- 0 to 400°C
- Position
- Rear
Installation guide - Replacing brake pads
General guidance for this part type - always follow your device manual- Jack and axle stands
- Wheel wrench
- Caliper piston tool or large clamp
- Brake cleaner
- Replace pads on both sides of the same axle together.
- This is an advanced job: follow your vehicle's service manual, or have a qualified mechanic fit it.
- 1Make it safe. Park on level ground, engine off, and loosen the wheel nuts. Raise the car, support it on axle stands (never only a jack) and remove the wheel.
- 2Remove the old pads. Undo the caliper slide bolts or pad retainers as your manual describes, swing or lift the caliper off and take out the pads, noting clips and shims.
- 3Push the piston back. Open the brake fluid cap and press the piston back slowly with the tool. Rear calipers with an integrated parking brake must be wound back, not pushed.
- 4Fit the new pads. Fit new clips and shims, seat the pads, refit the caliper and tighten bolts and wheel nuts to your manual's values.
- 5Pump and bed in. Pump the brake pedal until firm before moving, check the fluid level, then bed the pads in with several gentle stops.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Squealing or squeaking when braking
- 02Grinding metal-on-metal noise
- 03Longer stopping distance or a soft pedal
- 04Pad material looks thin through the wheel
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this rear brake pads fit?
Our team verified it for Honda VFR800F, Honda CB1000, Honda VFR800, Honda VFR 800 F ABS, Honda CB 1000 R, Honda VFR 800 FD Interceptor DLX and 1 more. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 1 pair, as listed for this part. Check the photos and specifications for the exact contents.
+Which side or position is it for?
Listed position: Rear. Check the side before ordering; left and right parts differ.
+What is the rear brake pads made of?
Listed material: Ceramic Fibre.
+Is it hard to install?
Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.