PCV Valve Grommet Seal compatible with Toyota Corolla 1993-1997
Made from high-quality materials for practical and durable use in specific vehicle engines.
Key facts
- Part type
- PCV Valve Grommet Seal
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Toyota | Toyota Corolla | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Toyota: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.
General manufacturer guidance: exact label position can vary by model.
PCV Valve Grommet Seal specifications
- Condition
- Brand New
- Material
- Rubber
- Part Number
- 90480-18001
Installation guide - Replacing an engine or vehicle seal
General guidance for this part type - always follow your device manual- Tools as your service manual specifies
- Plastic scraper
- Never reuse a crushed or hardened gasket.
- 1Make it safe. Engine off and cool, car supported on axle stands if you work underneath.
- 2This is an advanced job. follow your vehicle's service manual, or have a qualified mechanic fit it.
- 3Remove the old seal. Remove the parts covering it, then lift the seal out and clean the mating surfaces without scratching them.
- 4Fit the new seal. Fit it in the same position and direction; add sealant only if your service manual calls for it.
- 5Reassemble and check. Tighten bolts in the order and to the values in your manual, then check for leaks after a short run.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
More parts for Toyota Corolla
See all Toyota Corolla parts
FP-0828D4×4
FP-4B4BE0
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this pcv valve grommet seal fit?
Our team verified it for Toyota Corolla. The full list is in the compatibility table above.
+Which model years does it fit?
Verified for model years 1993–1997. Check the year of your vehicle in the table above.
+How do I make sure it fits my exact model?
Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.
+What part numbers does it replace?
Listed reference numbers: 90480-18001. Compare them with the number on your old pcv valve grommet seal.
+What is the pcv valve grommet seal made of?
Listed material: Rubber.
+Is it hard to install?
Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.