O-Ring Seal Kit compatible with Philips Saeco Coffee Machines
A food-grade silicone O-ring seal kit designed for coffee machine maintenance. These gaskets are used for the brewing group and spout connector to ensure a leak-free seal.
01Key facts
- Part type
- O-Ring Seal Kit
- Category
- Espresso Gaskets & Seals
- Part no. (MPN)
- Not published
- Pack
- Set
- Verified models
- 1
- Brands covered
- 1
- Customer rating
- No reviews yet
- Type
- Aftermarket replacement
02Compatibility matrix
Only models verified by our team are listed| Brand | Model | Status | Parts for model |
|---|---|---|---|
| Philips Saeco | Philips Saeco Coffee Machine | Verified | View → |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Philips Saeco: Usually on the rating plate under the machine or behind the water tank.
General manufacturer guidance — exact label position can vary by model.
03Specifications
Catalog-normalized- Material
- Food Grade Silicone
- Origin
- Mainland China
- Type
- Coffee Maker Parts
04Installation guide - Replacing a gasket / O-ring seal
General guidance for this part type - always follow your device manual- Flat tool or pick (plastic preferred) to lift the old seal
- A light smear of food-grade silicone grease helps the seal seat and last longer.
- If it still leaks after replacement, the groove may be scaled - descale and refit.
- 1Switch the device off and unplug it (or remove the battery) before starting.
- 2Let hot parts cool completely before touching the group head or boiler area.
- 3Remove the old gasket or O-ring: pry it out gently with a plastic pick, working around the edge.
- 4Clean the groove thoroughly - old coffee residue and scale prevent the new seal from seating.
- 5Press the new seal into the groove evenly, flat side as the old one was oriented, with no twists.
- 6Run water through the machine and check for drips around the seal before making coffee.
Read the full guide: How to Replace an Espresso Machine Gasket or O-Ring →
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Water leaks around the portafilter during brewing
- 02The portafilter handle turns past its usual lock position
- 03The old gasket looks flattened, cracked or brittle
- 04Brew pressure feels weak and shots run fast
12-month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you — claim it straight from your order page.
07Customer reviews
No reviews yet. Bought this part? Be the first to review it.
Questions & answers
+What's in the box?
Pack size: Set, as listed for this part. Check the photos and specifications for the exact contents.
+What is it made of?
Listed material: Food Grade Silicone.
+Which models has your team verified?
1 model is verified, see the compatibility table above.
More in our fit guarantee, returns policy and shipping.
