LED Battery Charger NP-BN1 compatible with Sony DSC-QX10, DSC-QX30, DSC-QX100, DSC-W800, DSC-W810, DSC-W830
LED Micro USB Battery Charger for NP-BN1 camera batteries. Features a compact design with an LED status indicator and 5V USB input for versatile charging.
Key facts
- Part type
- Battery Charger
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Sony | Sony DSC-QX10 | Fits |
| Sony DSC-W810 | Fits | |
| Sony DSC-QX100 | Fits | |
| Sony DSC-W800 | Fits | |
| Sony DSC-W830 | Fits | |
| Sony DSC-QX30 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Sony: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.
General manufacturer guidance: exact label position can vary by model.
Battery Charger specifications
- Input Voltage
- 5V
- Output Voltage
- 4.2V
- Interface
- Micro USB
- Certification
- CE
Installation guide - General replacement guidance
General guidance for this part type - always follow your device manual- Basic hand tools, only if your manual requires them
- If anything does not fit without force, stop and recheck the model on this page.
- Keep the old part until the new one is confirmed working.
- 1Switch off and unplug. Disconnect the device from power and let hot parts cool.
- 2Find the part. Check your device manual for the access panel, latches or screws; photograph each step as you go.
- 3Remove the old part. Note its orientation and any connectors, and release connectors by their plug body, never the wires.
- 4Compare and fit. Hold the old and new parts side by side, then fit the new one the same way round without forcing it.
- 5Reassemble and test. Refit covers, reconnect power and run a short test before regular use.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Much shorter run time per charge
- 02Device will not hold a charge or shuts off early
- 03Battery gets unusually hot
- 04Swelling or leaking (stop using it)
More parts for Sony DSC-QX10
See all Sony DSC-QX10 parts
FP-831228
FP-9CC8E6
FP-CA8F3512 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this battery charger fit?
Our team verified it for Sony DSC-QX10, Sony DSC-W810, Sony DSC-QX100, Sony DSC-W800, Sony DSC-W830, Sony DSC-QX30. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What voltage does it use?
Listed voltage: 5V. It must match the voltage of your original part.
+What connector does it use?
Listed connector: Micro USB.
+Does it have any certifications?
Listed certification: CE, as stated by the manufacturer.
+Is it hard to install?
Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.