Manifold Burner Control Valve compatible with Weber E210, E310, E315, E320, Spirit II E-210
This replacement part supports a power capacity ranging from a small flame of 5200 BTU to a large flame of 10425 BTU. It features a 1/4 inch connecting shaft and M5 clamp mounting thread.
Key facts
- Part type
- Burner Control Valve
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Weber | Weber E310 | Fits |
| Weber Spirit II E-210 | Fits | |
| Weber E315 | Fits | |
| Weber E320 | Fits | |
| Weber E210 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Weber: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.
General manufacturer guidance: exact label position can vary by model.
Burner Control Valve specifications
- Gas Type
- Natural Gas
- Connecting Shaft
- 1/4"
- Clamp Mounting Thread
- M5
- Low Flame Rating
- 5200 BTU
- High Flame Rating
- 10425 BTU
Installation guide - Replacing grill burners or heat plates
General guidance for this part type - always follow your device manual- Screwdriver or pliers
- Soapy water and a brush for the leak test
- Spiders nest in burner tubes; a yellow or uneven flame often means a blocked tube.
- 1Make it safe. Turn the gas off at the tank, disconnect the regulator and let the grill cool.
- 2Remove the grates and plates. Lift out the cooking grates and the flavorizer bars or heat plates above the burners.
- 3Remove the old burner. Undo the pin or screw at the back and slide the burner off its gas valve nozzle.
- 4Fit the new parts. Slide the burner fully over the valve nozzle, secure it, and lay new bars or plates in the same slots.
- 5Leak test and light. Reconnect the gas, brush soapy water on the connections (bubbles mean a leak), then light each burner and check for an even blue flame.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Uneven or yellow, weak flames
- 02Burner holes are rusted or clogged
- 03Burner will not stay lit
More parts for Weber E210
See all Weber E210 parts
FP-04D028×3
More parts for Weber E310
See all Weber E310 parts
FP-970876
FP-B149FE
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this burner control valve fit?
Our team verified it for Weber E310, Weber Spirit II E-210, Weber E315, Weber E320, Weber E210. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+Is it hard to install?
Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.