Skip to content
Fitly Parts
FP-3C484BCC

Main Side Brush and HEPA Filter Kit compatible with iRobot Roomba 600

Main Side Brush and HEPA Filter Kit for iRobot Roomba 600
No reviews yet
1 kitRobot Vacuum Parts
Skill levelEasy · no tools, a few minutes

Includes main brushes, side brushes, and HEPA filters to maintain peak cleaning performance.

Key facts

Part type
Main Brush, Side Brush, And HEPA Filter Kit
Included
1 kit
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
IrobotiRobot Roomba 600 Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Irobot: Flip the robot over. The model and serial are on the label under the bin or on the bottom of the robot.

General manufacturer guidance: exact label position can vary by model.

Main Brush, Side Brush, And HEPA Filter Kit specifications

Material
Plastic
Application
Robot Vacuum Maintenance

Installation guide - Replacing a filter

General guidance for this part type - always follow your device manual
Tools
  • No tools required in most cases
Tips
  • Do not wash a filter unless it is marked washable; wet HEPA media stops filtering.
  • If the filter does not sit flush, stop and recheck the model on this page.
  1. 1Switch off and unplug. Power the device down and unplug it.
  2. 2Open the filter compartment. It is usually behind a front or back cover, or inside the dustbin on vacuums. Your manual shows the exact spot.
  3. 3Remove the old filter. Note how it sat, especially any airflow arrow or rubber seal facing the motor. Tap dust off into a bag outdoors.
  4. 4Fit the new filter. Take off all plastic wrap, seat it the same way round until it sits flush with its seal fully in contact, and never force it.
  5. 5Close and test. Close the cover, run the device and check for normal sound and airflow. Reset the filter reminder if your device has one.

Read the full guide: How to Replace an Air Purifier HEPA Filter →

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

Full replacement guide
  1. 01Suction is weaker than usual
  2. 02Dust or odors escape from the exhaust
  3. 03Filter is grey, clogged or torn

More parts for iRobot Roomba 600

See all iRobot Roomba 600 parts
HEPA Filter compatible with iRobot Roomba 600FP-008CDC
For iRobot Roomba 600
HEPA Filter 600
$29.99
Main Brush Side Brush & Filter Kit compatible with iRobot Roomba 600FP-1642A8
For iRobot Roomba 600
Main Brush Side & Filter Kit 600
$14.99
Main Roller Brush Set (2 Pack) compatible with iRobot Roomba 600FP-75907C
For iRobot Roomba 600
Main Roller Brush Set 600
$34.99
Main Side Brush Hepa Filter Kit compatible with iRobot Roomba 600FP-8C4AAC
For iRobot Roomba 600
Main Side Brush Hepa Filter Kit 600
$57.99
Main Brush Side Brush and HEPA Filter compatible with iRobot Roomba 600FP-A65264
For iRobot Roomba 600
Main Brush Side and HEPA Filter 600
$87.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this main brush, side brush, and hepa filter kit fit?

Our team verified it for iRobot Roomba 600. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.

+What's in the box?

Pack size: 1 kit, as listed for this part. Check the photos and specifications for the exact contents.

+What is the main brush, side brush, and hepa filter kit made of?

Listed material: Plastic.

+Is it hard to install?

Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$98.99
1