Skip to content
Fitly Parts
FP-6DA8E7A9

HEPA Filters compatible with Dreame L40S Pro Ultra, L40s Ultra, L50 Pro Ultra, X50 Master, X50 Ultra

HEPA Filters 4-Pack for Dreame X50 Master
No reviews yet
Robot Vacuum Parts
Skill levelEasy · no tools, a few minutes

This orange brush features a durable plastic construction to effectively lift dirt and debris from various floor types.

Key facts

Part type
HEPA Filter
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Dreame: Usually on a sticker under the main body, near the battery or under the dustbin.

General manufacturer guidance: exact label position can vary by model.

HEPA Filter specifications

Material
Plastic
Color
Orange
Part Type
Brushes

Installation guide - Replacing a filter

General guidance for this part type - always follow your device manual
Tools
  • No tools required in most cases
Tips
  • Do not wash a filter unless it is marked washable; wet HEPA media stops filtering.
  • If the filter does not sit flush, stop and recheck the model on this page.
  1. 1Switch off and unplug. Power the device down and unplug it.
  2. 2Open the filter compartment. It is usually behind a front or back cover, or inside the dustbin on vacuums. Your manual shows the exact spot.
  3. 3Remove the old filter. Note how it sat, especially any airflow arrow or rubber seal facing the motor. Tap dust off into a bag outdoors.
  4. 4Fit the new filter. Take off all plastic wrap, seat it the same way round until it sits flush with its seal fully in contact, and never force it.
  5. 5Close and test. Close the cover, run the device and check for normal sound and airflow. Reset the filter reminder if your device has one.

Read the full guide: How to Replace an Air Purifier HEPA Filter →

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

Full replacement guide
  1. 01Suction is weaker than usual
  2. 02Dust or odors escape from the exhaust
  3. 03Filter is grey, clogged or torn

More parts for Dreame L40S Pro Ultra

See all Dreame L40S Pro Ultra parts
Mop Pads 6-Pack compatible with Dreame L40S, L40S Pro Ultra, L40s Ultra, L50, L50 Pro Ultra, X50 Master, X50 UltraFP-1C629F
Fits 7 models
For Dreame L40S, L40S Pro Ultra
Mop Pads L40S, L50, X50
$15.99
Side Brushes 10-Pack compatible with Dreame L40S Pro Ultra, L40s Ultra, L50 Pro Ultra, X50 Master, X50 UltraFP-48DB59
Fits 5 models
For Dreame L40S Pro Ultra, L40s Ultra
Side Brushes L40S, L50, X50
$23.99
Dust Bags 15-Pack compatible with Dreame L40S Pro Ultra, L40s Ultra, L50 Pro Ultra, X50 Master, X50 UltraFP-4B9F8C
Fits 5 models
For Dreame L40S Pro Ultra, L40s Ultra
Dust Bags L40S, L50, X50
$47.99
Main Brush compatible with Dreame L40S Pro Ultra, L40s Ultra, L50 Pro Ultra, X50 Master, X50 UltraFP-59BD3D
Fits 5 models
For Dreame L40S Pro Ultra, L40s Ultra
Main Brush L40S, L50, X50
$19.99
Main Brush Cover compatible with Dreame L40S Pro Ultra, L40s Ultra, L50 Pro Ultra, X50 Master, X50 UltraFP-6D4E4D
Fits 5 models
For Dreame L40S Pro Ultra, L40s Ultra
Main Brush Cover L40S, L50, X50
$18.99
Silver Ion Module compatible with Dreame L40S Pro Ultra, L40s Ultra, L50 Pro Ultra, X50 Master, X50 UltraFP-7B390B
Fits 5 models
For Dreame L40S Pro Ultra, L40s Ultra
Silver Ion Module L40S, L50, X50
$22.99
Main Roller Brushes 2-Pack compatible with Dreame L40S Pro Ultra, L40s Ultra, L50 Pro Ultra, X50 Master, X50 UltraFP-B2C7D3
Fits 5 models
For Dreame L40S Pro Ultra, L40s Ultra
Main Roller Brushes L40S, L50, X50
$23.99
Side Brushes 6-Pack compatible with Dreame L40S Pro Ultra, L40s Ultra, L50 Pro Ultra, X50 Master, X50 UltraFP-C2DEF3 Best seller
Fits 5 models
For Dreame L40S Pro Ultra, L40s Ultra
Side Brushes L40S, L50, X50
$14.99
Dust Bags 6-Pack compatible with Dreame L40S Pro Ultra, L40s Ultra, L50 Pro Ultra, X50 Master, X50 UltraFP-D7552C
Fits 5 models
For Dreame L40S Pro Ultra, L40s Ultra
Dust Bags L40S, L50, X50
$25.99
Maintenance Kit 22-Piece compatible with Dreame L40S Pro Ultra, L40s Ultra, L50 Pro Ultra, X50 Master, X50 UltraFP-EB522B
Fits 5 models
For Dreame L40S Pro Ultra, L40s Ultra
Maintenance Kit 22-Piece L40S, L50, X50
$79.99
Main Roller Brushes 4-Pack compatible with Dreame L40S Pro Ultra, L40s Ultra, L50 Pro Ultra, X50 Master, X50 UltraFP-EB8395
Fits 5 models
For Dreame L40S Pro Ultra, L40s Ultra
Main Roller Brushes L40S, L50, X50
$32.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this hepa filter fit?

Our team verified it for Dreame X50 Master, Dreame L50 Pro Ultra, Dreame L40s Ultra, Dreame X50 Ultra, Dreame L40S Pro Ultra. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.

+What is the hepa filter made of?

Listed material: Plastic.

+Is it hard to install?

Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$23.99
1