Skip to content
Fitly Parts
FP-884D83A9

Ignition Coil Pack (6-Count) 6-Pack compatible with BMW E46, E53

Ignition Coil Pack (6-Count) for BMW E53
No reviews yet
6-packIgnition Coils
For BMW E46 +1 more
Skill levelAdvanced · mechanical experience needed

High-performance ignition coil set designed to transform low voltage into high voltage for efficient engine operation. Manufactured from superior-quality materials for maximum durability and precise performance. Pack includes six ignition coils for a complete replacement.

Key facts

Part type
Ignition Coil
Included
6-pack
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
BmwBMW E53 Fits
BMW E46 Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Bmw: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.

General manufacturer guidance: exact label position can vary by model.

Ignition Coil specifications

Material
Metal
Part Number
UF522 / 12131712219
Voltage Output
Approx. 67KV

Installation guide - Replacing spark plugs / ignition coils

General guidance for this part type - always follow your device manual
Tools
  • Spark plug socket, extension and ratchet
  • Torque wrench
  • Small pick for connector clips
Tips
  • One cylinder at a time keeps coil wiring in the right order.
  • Oil in a plug well points to a leaking valve cover gasket.
  1. 1Let the engine cool. Switch the engine off and let it cool fully; plugs removed from a hot aluminum head can strip its threads.
  2. 2Remove one coil. Work on one cylinder at a time. Press the connector clip, unplug it, undo the coil bolt and pull the coil straight out.
  3. 3Swap the plug. Blow dirt out of the plug well, unscrew the old plug and check the new plug's gap against your service manual.
  4. 4Fit by hand first. Thread the new plug in by hand for the first turns to avoid cross threading, then tighten to the value in your service manual. Refit the coil and connector.
  5. 5Repeat and test. Do each cylinder in turn, then start the engine and check for smooth idle and no warning light.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

  1. 01Engine misfires, shakes or runs rough, especially at idle or under load
  2. 02Check engine light is on, often with a misfire code for one cylinder
  3. 03Hard starting, hesitation or loss of power when accelerating
  4. 04Fuel economy drops noticeably

More parts for BMW E53

See all BMW E53 parts

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this ignition coil fit?

Our team verified it for BMW E53, BMW E46. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.

+What's in the box?

Pack size: 6-pack, as listed for this part. Check the photos and specifications for the exact contents.

+What part numbers does it replace?

Listed reference numbers: UF522 / 12131712219. Compare them with the number on your old ignition coil.

+What is the ignition coil made of?

Listed material: Metal.

+Is it hard to install?

Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.

+How fast will it arrive?

This part is in stock in the USA: delivery within 3 to 8 business days, free shipping in the US.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$79.99
1