LED Headlight Bulbs H13 2-Pack compatible with Toyota Tundra
High-performance H13 LED headlight bulbs featuring 32000Lm brightness and CSP chips for a clear cut line. Designed with a built-in turbo fan and mini heat sink for efficient cooling and easy plug-and-play installation.
Key facts
- Part type
- LED Headlight Bulb
- Included
- 2-Pack
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Toyota | Toyota Tundra | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Toyota: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.
General manufacturer guidance: exact label position can vary by model.
LED Headlight Bulb specifications
- Bulb Type
- H13 / 9008 High/Low Beam
- Brightness
- 32,000 Lumens (Pair)
- Color Temperature
- 6000K White
- Wattage
- 120W per pair
- Voltage
- DC 12V
- LED Chip Type
- CSP GC-7535 Chips
- Cooling Type
- Built-in Turbo Fan
Installation guide - Replacing a car bulb
General guidance for this part type - always follow your device manual- Clean gloves or a cloth
- Screwdriver or trim tool, if the lamp has an access cover
- Replace bulbs in pairs so brightness and color stay even.
- Some LED bulbs need an error canceller on cars that check bulb current.
- 1Make it safe. Engine off, lights off, and let the old bulb cool.
- 2Reach the bulb. Open the access cover behind the lamp (under the hood or inside the trunk); your owner's manual shows where.
- 3Remove the old bulb. Twist the bulb holder counterclockwise and pull it out, then pull the bulb from the holder.
- 4Fit the new bulb. Hold halogen glass with a cloth, never bare fingers, and push it fully into the holder before twisting the holder back in.
- 5Test. Check the light works before refitting the cover; LED bulbs that do not light may need flipping 180 degrees in the holder.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Light is out, dim or flickering
- 02Cracked, foggy or yellowed lens
- 03Moisture or water inside the housing
- 04Dashboard bulb-out warning
More parts for Toyota Tundra
See all Toyota Tundra parts
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this led headlight bulb fit?
Our team verified it for Toyota Tundra. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 2-Pack, as listed for this part. Check the photos and specifications for the exact contents.
+What voltage does it use?
Listed voltage: DC 12V. It must match the voltage of your original part.
+What light source does it use?
Listed light source: H13 / 9008 High/Low Beam.
+Is it hard to install?
Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.