Glow Plugs, Gaskets & Relay Kit 13-Pack compatible with Ford Excursion, Super Duty
A comprehensive diesel engine service kit including two valve cover gaskets, two fuel injector harnesses, eight glow plugs, and one relay solenoid for 7.3L V8 engines.
Key facts
- Part type
- Glow Plug And Gasket Service Kit
- Included
- 13-pack
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Ford | Ford Excursion | Fits |
| Ford Super Duty | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Ford: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.
General manufacturer guidance: exact label position can vary by model.
Glow Plug And Gasket Service Kit specifications
- Engine Compatibility
- 7.3L V8 Diesel
- Material
- Metal, Others
Installation guide - Replacing spark plugs / ignition coils
General guidance for this part type - always follow your device manual- Spark plug socket, extension and ratchet
- Torque wrench
- Small pick for connector clips
- One cylinder at a time keeps coil wiring in the right order.
- Oil in a plug well points to a leaking valve cover gasket.
- 1Let the engine cool. Switch the engine off and let it cool fully; plugs removed from a hot aluminum head can strip its threads.
- 2Remove one coil. Work on one cylinder at a time. Press the connector clip, unplug it, undo the coil bolt and pull the coil straight out.
- 3Swap the plug. Blow dirt out of the plug well, unscrew the old plug and check the new plug's gap against your service manual.
- 4Fit by hand first. Thread the new plug in by hand for the first turns to avoid cross threading, then tighten to the value in your service manual. Refit the coil and connector.
- 5Repeat and test. Do each cylinder in turn, then start the engine and check for smooth idle and no warning light.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Water or coffee leaks around the seal
- 02Rubber is hard, cracked or flattened
- 03Loss of pressure or poor seal
More parts for Ford Excursion
See all Ford Excursion parts
More parts for Ford Super Duty
See all Ford Super Duty parts
FP-2CBA03
FP-99646F
FP-D2E31312 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this glow plug and gasket service kit fit?
Our team verified it for Ford Excursion, Ford Super Duty. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 13-pack, as listed for this part. Check the photos and specifications for the exact contents.
+What is the glow plug and gasket service kit made of?
Listed material: Metal, Others.
+Is it hard to install?
Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.
+How fast will it arrive?
This part is in stock in the USA: delivery within 3 to 8 business days, free shipping in the US.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.