Fuel Pump Assembly compatible with Abarth 500; Fiat 500 2012-2017
Features a 12V motor with a flow rate of at least 23.76 GPH and includes the fuel sending unit and strainer.
Key facts
- Part type
- Fuel Pump Assembly
- Included
- 1x Fuel Pump Module Assembly
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Abarth | Abarth 500 | Fits |
| Fiat | Fiat 500 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Abarth, Fiat: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.
General manufacturer guidance: exact label position can vary by model.
Fuel Pump Assembly specifications
- Material
- Metal
- Voltage
- 12V
- Pressure
- 43.5 PSI
- Terminal Quantity
- 4-pin Blade
- Flow Rate
- ≥23.76 GPH
Installation guide - Replacing a fuel pump
General guidance for this part type - always follow your device manual- Fuel line disconnect tools
- Lock ring tool or brass drift
- Fire extinguisher nearby
- This is an advanced job: follow your vehicle's service manual, or have a qualified mechanic fit it.
- Keep the tank low on fuel before starting; it makes the job safer and lighter.
- 1Make it safe. Engine off and cool, in a ventilated area with no sparks or flames. Relieve fuel pressure as your manual describes, then disconnect the battery negative (-) terminal.
- 2Reach the pump. Many cars have an access panel under the rear seat or trunk floor; others need the tank lowered (see your service manual).
- 3Disconnect. Unplug the connector and release the fuel lines with the disconnect tools, catching drips with a rag.
- 4Swap the pump. Undo the lock ring, lift the old assembly out tilted so the float arm clears, and fit the new one with a new seal, lined up with the tank's locating tab.
- 5Prime and check. Reconnect everything, turn the ignition on and off a few times to build pressure, check for leaks, then start the engine.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Engine cranks but will not start
- 02Sputtering or loss of power at highway speed or uphill
- 03Whining noise from the fuel tank
- 04Engine stalls when hot
More parts for Abarth 500
See all Abarth 500 parts
More parts for Fiat 500
See all Fiat 500 parts
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this fuel pump assembly fit?
Our team verified it for Abarth 500, Fiat 500. The full list is in the compatibility table above.
+Which model years does it fit?
Verified for model years 2012–2017. Check the year of your vehicle in the table above.
+How do I make sure it fits my exact model?
Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: 1x Fuel Pump Module Assembly, as listed for this part. Check the photos and specifications for the exact contents.
+What is the fuel pump assembly made of?
Listed material: Metal.
+Is it hard to install?
Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.
+How fast will it arrive?
This part is in stock in the USA: delivery within 3 to 8 business days, free shipping in the US.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.