Front ABS Wheel Speed Sensor compatible with Mercedes-Benz CL550, S350, S550

New front ABS wheel speed sensor for driver or passenger side.
Key facts
- Part type
- ABS Wheel Speed Sensor
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Mercedes Benz | Mercedes-Benz S550 | Fits |
| Mercedes-Benz S350 | Fits | |
| Mercedes-Benz CL550 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Mercedes Benz: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.
General manufacturer guidance: exact label position can vary by model.
ABS Wheel Speed Sensor specifications
- Placement on Vehicle
- Front, Left, Right
- Finish
- Aftermarket Replacement
Installation guide - Replacing an engine or wheel sensor
General guidance for this part type - always follow your device manual- Socket set (oxygen sensors need an O2 sensor socket)
- Penetrating oil
- OBD2 scanner
- If the same code returns, check the connector and wiring before suspecting the new sensor.
- 1Make it safe. Engine off and cool (exhaust parts stay hot for a long time). Raise the car on axle stands if the sensor is underneath.
- 2Follow the wire. Trace the sensor's wire to its connector, unplug it and unclip the wire from its holders, noting the route.
- 3Remove the old sensor. Soak rusty threads with penetrating oil first. Oxygen sensors unscrew with the O2 socket; wheel speed and crank sensors usually have one bolt and twist out. Clean rust from the mounting hole.
- 4Fit the new sensor. Keep anti-seize off an oxygen sensor's tip (new ones often come pre-coated on the threads). Lightly oil an O-ring, seat the sensor fully and route the wire through the original clips, away from hot or moving parts.
- 5Clear codes and test. Reconnect, clear the fault codes with an OBD2 scanner and drive to check the warning light stays off.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01ABS or traction control warning light is on
- 02ABS activates unexpectedly at low speed
- 03Speedometer reading drops out or is erratic
More parts for Mercedes-Benz CL550
See all Mercedes-Benz CL550 partsMore parts for Mercedes-Benz S350
See all Mercedes-Benz S350 parts
FP-165B44×412 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this abs wheel speed sensor fit?
Our team verified it for Mercedes Benz Mercedes-Benz S550, Mercedes Benz Mercedes-Benz S350, Mercedes Benz Mercedes-Benz CL550. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.
+Which side or position is it for?
Listed position: Front, Left, Right. Check the side before ordering; left and right parts differ.
+Is it hard to install?
Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.
+How fast will it arrive?
This part is in stock in the USA: delivery within 3 to 8 business days, free shipping in the US.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.


