Skip to content
Fitly Parts
FP-027BD993

Universal F1 Style 15 LED Brake Pilot Light (White Shell)

Universal F1 Style 15 LED Brake Pilot Light (White Shell)
No reviews yet
Tail Lights
Skill levelAdvanced · mechanical experience needed

Upgrade your vehicle's safety with this F1-style LED pilot light featuring 15 ultra-bright LEDs in a white shell. It functions as both a steady driving light and a flashing strobe brake light for maximum visibility in all weather conditions. Installation is versatile and simple using either the included 3M adhesive tape or the bracket mount.

Key facts

Part type
LED Brake Pilot Light
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
Fit unconfirmedNo exact-model compatibility has been confirmed for this part.

To see if it fits your vehicle, compare these published specifications with your original part:

Voltage
12V
LED Quantity
15 LEDs
Waterproof Rating
IP68
Material
ABS Plastic
Lighting Modes
Steady (Driving) + Strobe (Braking)
Shell Color
White

Not sure? Send us your exact model number and we will confirm the fit before you order.

We have not confirmed a model list for this part yet. Match it with the published specifications above, or send us your exact model number and we will confirm before you order.

LED Brake Pilot Light specifications

Voltage
12V
LED Quantity
15 LEDs
Waterproof Rating
IP68
Material
ABS Plastic
Lighting Modes
Steady (Driving) + Strobe (Braking)
Shell Color
White

Installation guide - Replacing a tail light assembly

General guidance for this part type - always follow your device manual
Tools
  • Socket set or nut driver
  • Plastic trim tool
  • Masking tape
Tips
  • Check for water marks in the trunk later; a gap in the gasket lets water in.
  1. 1Make it safe. Engine off, lights off. Open the trunk or tailgate.
  2. 2Reach the fixings. Remove the access cover or trim panel inside the trunk behind the lamp; the nuts are on the back of the lamp. Some lamps also have screws on the edge facing the open tailgate.
  3. 3Remove the old lamp. Unplug the connector by pressing its tab, undo the nuts and pull the lamp straight back. Put tape on the paint around the lamp first; ball clips need a firm, wiggling pull.
  4. 4Fit the new lamp. Move the bulbs across if the new lamp has none, check its gasket is seated, push it onto the studs and tighten the nuts snug, not hard, since the housing is plastic.
  5. 5Test every function. With a helper, check tail, brake, turn, reverse and hazard lights before refitting the trim.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models has your team verified?

None yet. The title shows the models this part is designed for, but our team hasn't confirmed the fit. Compare the part with your old one before ordering.

+What voltage does it use?

Listed voltage: 12V. It must match the voltage of your original part.

+Is it waterproof?

Listed water rating: IP68.

+What is the led brake pilot light made of?

Listed material: ABS Plastic.

+Is it hard to install?

Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$25.99
1