Skip to content
Fitly Parts
FP-4762B603

Battery EP500 compatible with Sony E15i, SK17i, ST15i, U5i, U8i, X7, X8, X8i; Sony Ericsson E16i, ST17I, W8, WT18i, WT19i

EP500 Battery
No reviews yet
Phone Parts
Skill levelAdvanced · mechanical experience needed

Features an integrated microchip to prevent overcharging and extend battery life.

Key facts

Part type
Phone Battery
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
SonySony ST15i Fits
Sony X7 Fits
Sony U8i Fits
Sony SK17i Fits
Sony U5i Fits
Sony X8i Fits
Sony E15i Fits
Sony X8 Fits
Sony EricssonSony Ericsson WT18i Fits
Sony Ericsson ST17I Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Sony, Sony Ericsson: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.

General manufacturer guidance: exact label position can vary by model.

Phone Battery specifications

Capacity
1200mAh
Voltage
3.7VDC
Battery Type
Li-ion
Dimensions
4.3 x 4.5 x 0.6 cm

Installation guide - Replacing a removable phone battery

General guidance for this part type - always follow your device manual
Tools
  • No tools required
Tips
  • Check that the battery code printed on the old battery (for example BL-5C) matches the one on this listing.
  • Wipe the phone's contacts with a dry cloth if the phone does not power on.
  1. 1Switch the phone off. Hold the power key until the phone shuts down. Never pull a battery from a phone that is still on.
  2. 2Remove the back cover. Press the release button or slide the cover off with both thumbs; on flip phones the latch is usually at the bottom of the back.
  3. 3Lift out the old battery. Use the small notch at the battery's edge. Note which end carries the gold contacts and which way the label faces.
  4. 4Fit the new battery. Line its contacts up with the spring contacts in the phone, slide that end in first and press the other end down until it lies flat.
  5. 5Close and charge. Refit the cover, switch on to check the phone powers up, then charge to full before regular use.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

  1. 01Much shorter run time per charge
  2. 02Device will not hold a charge or shuts off early
  3. 03Battery gets unusually hot
  4. 04Swelling or leaking (stop using it)

More parts for Sony E15i

See all Sony E15i parts

More parts for Sony SK17i

See all Sony SK17i parts
EP500 Battery compatible with Sony SK17i, ST15i, U5i, U8i; Sony Ericsson E16i, Vivaz U5i, W8, Xperia SK17i, Xperia WT19iFP-137019
Fits 9 models
For Sony SK17i, ST15i
Battery EP500 SK17i, ST15i, U5i, U8i; E16i, W8, WT19i
$25.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this phone battery fit?

Our team verified it for Sony ST15i, Sony Ericsson WT18i, Sony Ericsson ST17I, Sony X7, Sony U8i, Sony SK17i and 7 more. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.

+What is the battery capacity?

Listed capacity: 1200mAh. A capacity that differs from your original changes run time, not fit.

+What battery chemistry is it?

Listed type: Li-ion. Replace with the same chemistry as your original battery.

+What voltage does it use?

Listed voltage: 3.7VDC. It must match the voltage of your original part.

+What are the dimensions?

Listed size: 4.3 x 4.5 x 0.6 cm. Measure your old phone battery to compare.

+Is it hard to install?

Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$10.99
1