Electric Floor Brush with LED Light compatible with Dyson V7 V8 V10 V11 V15
Replacement electric floor brush head featuring a green LED light to reveal dust and debris. Constructed with soft nylon bristles and ABS material, it is designed for hard floor surfaces like tile and hardwood.
01Key facts
- Part type
- Electric Floor Brush Head
- Category
- Stick vacuums
- Part no. (MPN)
- Not published
- Pack
- Not published
- Verified models
- 5
- Brands covered
- 1
- Customer rating
- No reviews yet
- Type
- Aftermarket replacement
02Compatibility matrix
Only models verified by our team are listed| Brand | Model | Status | Parts for model |
|---|---|---|---|
| Dyson | Dyson V7 | Verified | View → |
| Dyson V8 | Verified | View → | |
| Dyson V10 | Verified | View → | |
| Dyson V11 | Verified | View → | |
| Dyson V15 Detect | Verified | View → |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Dyson: On the silver or white sticker under the main body or behind the bin/battery. The serial starts with letters (e.g. a 3-letter code) that identify the model family.
- Dyson V7 · model no. SV11 — model-specific location not yet confirmed; use the brand guidance above.
- Dyson V8 · model no. SV10 — model-specific location not yet confirmed; use the brand guidance above.
- Dyson V10 · model no. SV12 — model-specific location not yet confirmed; use the brand guidance above.
- Dyson V11 · model no. SV14 — model-specific location not yet confirmed; use the brand guidance above.
- Dyson V15 Detect · model no. SV22 — model-specific location not yet confirmed; use the brand guidance above.
General manufacturer guidance — exact label position can vary by model.
03Specifications
Catalog-normalized- Material
- ABS, Nylon
- Features
- Green LED Laser Light, 180° Swivel Joint
- Color
- Yellow and Blue
04Additional attributes
Reference data - not independently verified| Variant | asshown |
Attributes above are reference values from the supply chain. They are shown for comparison only and are not a verified measurement of this part.
05How to check this part
- Match the complete model name or number against the verified models above.
- Compare the part type, pack contents and any published specifications to the part you are replacing.
- Where a required dimension or connector is not published, contact us rather than treating missing information as a match.
06Supplier vs manufacturer cross-check
What the listing claims, compared with official manufacturer guidance| Topic | Supplier listing | Manufacturer guidance | Our check |
|---|---|---|---|
| Compatibility | Model list claimed in the listing | Match the model number on your device label | 5 models verified |
| Specifications | 4 attributes published | Compare with the original part listed in your device manual | Reference only, not measured by us |
| Installation | No official instructions supplied | Our guide below follows manufacturer guidance |
Where the supplier and the manufacturer differ, follow the manufacturer.
07Installation guide - Replacing a brush
General guidance for this part type - always follow your device manual- Small screwdriver (only if the brush is screwed in)
- Replace brushes in pairs when a set is supplied, so wear stays even.
- 1Switch the device off and unplug it (or remove the battery) before starting.
- 2Turn the device over to access the brush area.
- 3Remove the old brush: pull it straight off its post, or undo the single retaining screw if present.
- 4Clear hair and debris from the brush post and surrounding area.
- 5Press the new brush onto the post (or refit the screw) until secure.
- 6Spin the brush by hand to confirm it rotates freely.
Read the full guide: How to Replace a Vacuum Roller (Main Brush) →
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Bristles are worn down, bent or missing in sections
- 02Hair and thread are wrapped so tightly the roller barely spins
- 03The roller makes a thumping or rattling sound
- 04Carpets look flattened after vacuuming instead of groomed
More parts for your Dyson V7
Also verified for Dyson V8, Dyson V10, Dyson V11, Dyson V15 Detect
FP-43596DFor Dyson V7 V8 V10 V11 V15
FP-DC09CFFor Ford F-150 V8 5.4L 2004-2008
12-month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you — claim it straight from your order page.
07Customer reviews
No reviews yet. Bought this part? Be the first to review it.
Questions & answers
Questions & answers
+What is it made of?
Listed material: ABS, Nylon.
+Which models has your team verified?
5 models are verified, see the compatibility table above.
+How do I install the electric floor brush head?
Follow the installation guide on this page together with your device's user manual. Always switch off and unplug the device first.
+How long does shipping take?
Free to the US, $4.99 to the other 15 countries we ship to. See Shipping & returns for the estimated window to your country.
+Is there a warranty?
Yes, every part comes with a 12-month warranty. You can file a claim from the order page in your account.
+How do I know the electric floor brush head fits my model?
Check the "Verified compatible with" list. Only models our team has confirmed appear there. If your model isn't listed, the fit hasn't been confirmed yet.
+Is this an original manufacturer (OEM) part?
No. Fitly Parts sells compatible aftermarket parts. Brand and model names are used only to describe compatibility.
+What if it doesn't fit?
Parts marked as compatible are covered by our fit guarantee - we'll replace it or refund you.
+Can I save my devices?
Yes. Add your models under My devices and every part that fits them gets a "Fits your…" badge across the store.
More in our fit guarantee, returns policy and shipping.
