DIY Midframe Housing Replacement compatible with Apple iPhone 11 Pro Max
This DIY housing replacement allows you to update the look of your device to a modern flat-edge frame style. Please note that the ultrawide-angle and telephoto cameras will become non-functional after installation. The kit includes the rear battery midframe chassis.
Key facts
- Part type
- Housing Chassis
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Apple | Apple iPhone 11 Pro Max | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Apple: Usually on the rating label under or on the back of the device. Your owner's manual also lists the model number.
General manufacturer guidance: exact label position can vary by model.
Housing Chassis specifications
- Compatibility
- iPhone 11 Pro Max custom conversion
Installation guide - Replacing a back cover
General guidance for this part type - always follow your device manual- Hair dryer or heat pad
- Suction cup and plastic opening picks
- New back adhesive
- Keep the pick shallow near the camera and the wireless charging coil under the glass.
- 1Prepare. Switch the device off. If the cover clips off by hand (older and classic phones), simply unclip it and skip to the last step.
- 2Remove the glued cover. Heat the edges well, lift a corner with the suction cup and slice the adhesive slowly all the way round. Cracked glass: cover it with packing tape first so it lifts in one piece.
- 3Move any parts across. Transfer the camera lens ring, flash diffuser or flex cables attached to the old cover if the new one has none.
- 4Clean the frame. Remove all old adhesive and glass dust so the new cover sits flat.
- 5Fit the new cover. Apply new adhesive, press the cover on and hold it down evenly while the adhesive bonds.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this housing chassis fit?
Our team verified it for Apple iPhone 11 Pro Max. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+Is it hard to install?
Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.