Cylinder Head Gasket Set compatible with Chevrolet Silverado GMC Savana Escalade
Replacement front engine cylinder head gasket set made of metal and other durable materials. Fits 6.0L and 6.2L V8 engines for specific GM truck and SUV models.
01Key facts
- Part type
- Cylinder Head Gasket Set
- Category
- Espresso Gaskets & Seals
- Part no. (MPN)
- Not published
- Pack
- Not published
- Verified models
- 3
- Brands covered
- 3
- Customer rating
- No reviews yet
- Type
- Aftermarket replacement
02Compatibility matrix
Only models verified by our team are listed| Brand | Model | Status | Parts for model |
|---|---|---|---|
| Cadillac | Cadillac Escalade | Verified | View → |
| Gmc | GMC Savana | Verified | View → |
| Dyson | Dyson V8 | Verified | View → |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Cadillac: Use your 17-character VIN — it's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.
- Cadillac Escalade — model-specific location not yet confirmed; use the brand guidance above.
- Gmc: Use your 17-character VIN — it's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.
- GMC Savana — model-specific location not yet confirmed; use the brand guidance above.
- Dyson: On the silver or white sticker under the main body or behind the bin/battery. The serial starts with letters (e.g. a 3-letter code) that identify the model family.
- Dyson V8 · model no. SV10 — model-specific location not yet confirmed; use the brand guidance above.
General manufacturer guidance — exact label position can vary by model.
03Specifications
Catalog-normalized- Material
- Metal, Others
- OE Number Reference
- HS26192PT-5
- Variant ID
- 49853936
04Additional attributes
Reference data - not independently verified| Variant | 49853936 |
Attributes above are reference values from the supply chain. They are shown for comparison only and are not a verified measurement of this part.
05How to check this part
- Match the complete model name or number against the verified models above.
- Compare the part type, pack contents and any published specifications to the part you are replacing.
- Where a required dimension or connector is not published, contact us rather than treating missing information as a match.
06Supplier vs manufacturer cross-check
What the listing claims, compared with official manufacturer guidance| Topic | Supplier listing | Manufacturer guidance | Our check |
|---|---|---|---|
| Compatibility | Model list claimed in the listing | Match the model number on your device label | 3 models verified |
| Specifications | 4 attributes published | Compare with the original part listed in your device manual | Reference only, not measured by us |
| Installation | No official instructions supplied | Our guide below follows manufacturer guidance |
Where the supplier and the manufacturer differ, follow the manufacturer.
07Installation guide - Replacing a gasket / O-ring seal
General guidance for this part type - always follow your device manual- Flat tool or pick (plastic preferred) to lift the old seal
- A light smear of food-grade silicone grease helps the seal seat and last longer.
- If it still leaks after replacement, the groove may be scaled - descale and refit.
- 1Switch the device off and unplug it (or remove the battery) before starting.
- 2Let hot parts cool completely before touching the group head or boiler area.
- 3Remove the old gasket or O-ring: pry it out gently with a plastic pick, working around the edge.
- 4Clean the groove thoroughly - old coffee residue and scale prevent the new seal from seating.
- 5Press the new seal into the groove evenly, flat side as the old one was oriented, with no twists.
- 6Run water through the machine and check for drips around the seal before making coffee.
Read the full guide: How to Replace an Espresso Machine Gasket or O-Ring →
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Water leaks around the portafilter during brewing
- 02The portafilter handle turns past its usual lock position
- 03The old gasket looks flattened, cracked or brittle
- 04Brew pressure feels weak and shots run fast
More parts for your Cadillac Escalade
Also verified for GMC Savana, Dyson V8
FP-C6D50EFor Chevrolet Express & GMC Savana
FP-DC09CFFor Ford F-150 V8 5.4L 2004-2008
12-month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you — claim it straight from your order page.
07Customer reviews
No reviews yet. Bought this part? Be the first to review it.
Questions & answers
Questions & answers
+What is it made of?
Listed material: Metal, Others.
+Which models has your team verified?
3 models are verified, see the compatibility table above.
+How do I install the cylinder head gasket set?
Follow the installation guide on this page together with your device's user manual. Always switch off and unplug the device first.
+How long does shipping take?
Free to the US, $4.99 to the other 15 countries we ship to. See Shipping & returns for the estimated window to your country.
+Is there a warranty?
Yes, every part comes with a 12-month warranty. You can file a claim from the order page in your account.
+How do I know the cylinder head gasket set fits my model?
Check the "Verified compatible with" list. Only models our team has confirmed appear there. If your model isn't listed, the fit hasn't been confirmed yet.
+Is this an original manufacturer (OEM) part?
No. Fitly Parts sells compatible aftermarket parts. Brand and model names are used only to describe compatibility.
+What if it doesn't fit?
Parts marked as compatible are covered by our fit guarantee - we'll replace it or refund you.
+Can I save my devices?
Yes. Add your models under My devices and every part that fits them gets a "Fits your…" badge across the store.
More in our fit guarantee, returns policy and shipping.
