Coolant Reservoir Tank compatible with Chrysler 300; Dodge Challenger, Charger
Direct replacement engine coolant reservoir tank with cap included. Pressurized plastic expansion tank features a 16 PSI spring-loaded twist cap.
Key facts
- Part type
- Coolant Expansion Tank
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Dodge | Dodge Charger | Fits |
| Dodge Challenger | Fits | |
| Chrysler | Chrysler 300 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Dodge, Chrysler: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.
General manufacturer guidance: exact label position can vary by model.
Coolant Expansion Tank specifications
- Material
- Plastic
- Maximum Pressure Rating
- 16 PSI
- Color
- White
- Height
- 272.3 mm
- Length
- 361.7 mm
Installation guide - Replacing a cooling system part
General guidance for this part type - always follow your device manual- Drain pan
- Pliers for hose clamps
- Correct coolant for your vehicle
- This is an advanced job: follow your vehicle's service manual, or have a qualified mechanic fit it.
- Recheck the coolant level after the first few drives as trapped air works out.
- 1Make it safe. Engine off and completely cold. Never open the radiator or reservoir cap on a hot engine.
- 2Drain the coolant. Open the drain plug or remove the lower hose into a drain pan, and keep coolant away from pets.
- 3Remove the old part. Undo the hose clamps and bolts, noting each hose's position, and clean the old gasket off the mating surfaces.
- 4Fit the new part. Use the new gasket or O-ring, tighten bolts evenly to your manual's values and refit hoses with their clamps.
- 5Refill and bleed. Refill with the coolant your manual specifies, run the engine with the heater on full to purge air, top up, and check for leaks once cool.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Device no longer charges or charges intermittently
- 02Cable or contacts are damaged
- 03Charger gets unusually hot
More parts for Chrysler 300
See all Chrysler 300 parts
FP-FB317DMore parts for Dodge Challenger
See all Dodge Challenger parts
More parts for Dodge Charger
See all Dodge Charger parts
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this coolant expansion tank fit?
Our team verified it for Dodge Charger, Chrysler 300, Dodge Challenger. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.
+What is the coolant expansion tank made of?
Listed material: Plastic.
+What are the dimensions?
Listed size: 361.7 mm. Measure your old coolant expansion tank to compare.
+Is it hard to install?
Install difficulty: Easy · no tools, a few minutes. Step by step instructions are on this page.
+How fast will it arrive?
This part is in stock in the USA: delivery within 3 to 8 business days, free shipping in the US.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.