Skip to content
Fitly Parts
FP-50A86511

Camshaft Position Sensor compatible with Infiniti FX35, G35, I35, M35, QX56

Camshaft Position Sensor
No reviews yet
Crankshaft & Camshaft Sensors
For Infiniti FX35 +4 more
Skill levelAdvanced · mechanical experience needed

Key facts

Part type
Camshaft Position Sensor
Type
Aftermarket replacement

Compatibility matrix

Only models verified by our team are listed
This one part fits every model listed below. No need to open each model, just add this item to your cart.
Parts forModelThis part
InfinitiInfiniti M35 Fits
Infiniti QX56 Fits
Infiniti FX35 Fits
Infiniti I35 Fits
Infiniti G35 Fits

Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.

Where to find your model number

  • Infiniti: Use your 17-character VIN. It's on the driver-side dashboard at the base of the windshield and on the driver's door jamb sticker. The year is in the 10th character. Also check your registration or the owner's manual.

General manufacturer guidance: exact label position can vary by model.

Camshaft Position Sensor specifications

Placement
Camshaft
Material
Plastic Black
Interchange Part Number
23731-AL61A, 237317Y000, PC461S, SU6480

Installation guide - Replacing an engine or wheel sensor

General guidance for this part type - always follow your device manual
Tools
  • Socket set (oxygen sensors need an O2 sensor socket)
  • Penetrating oil
  • OBD2 scanner
Tips
  • If the same code returns, check the connector and wiring before suspecting the new sensor.
  1. 1Make it safe. Engine off and cool (exhaust parts stay hot for a long time). Raise the car on axle stands if the sensor is underneath.
  2. 2Follow the wire. Trace the sensor's wire to its connector, unplug it and unclip the wire from its holders, noting the route.
  3. 3Remove the old sensor. Soak rusty threads with penetrating oil first. Oxygen sensors unscrew with the O2 socket; wheel speed and crank sensors usually have one bolt and twist out. Clean rust from the mounting hole.
  4. 4Fit the new sensor. Keep anti-seize off an oxygen sensor's tip (new ones often come pre-coated on the threads). Lightly oil an O-ring, seat the sensor fully and route the wire through the original clips, away from hot or moving parts.
  5. 5Clear codes and test. Reconnect, clear the fault codes with an OBD2 scanner and drive to check the warning light stays off.

This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.

Maintenance check

Signs it's time to replace

  1. 01Engine cranks but will not start, or stalls while driving
  2. 02Intermittent misfires or rough running
  3. 03Check engine light is on
  4. 04Tachometer behaves erratically

More parts for Infiniti FX35

See all Infiniti FX35 parts
Iridium Spark Plug compatible with Infiniti FX35; Kia Forte; Nissan Altima; Toyota VenzaFP-429CB8×4
Fits 4 models
For Infiniti FX35; Kia Forte; Nissan Altima; Toyota Venza
Iridium Spark Plug FX35;
$34.99

More parts for Infiniti G35

See all Infiniti G35 parts
Electric Exhaust Cutout Valve Kit (2.5") compatible with Honda Civic; Infiniti G35FP-4BB8C5
Fits 2 models
For Honda Civic; Infiniti G35
Electric Exhaust Cutout Valve Kit (2.5") G35
$197.99
Camshaft Position Sensor compatible with Infiniti G35; Nissan Altima, MaximaFP-53DCDE
Fits 3 models
For Infiniti G35; Nissan Altima, Maxima
Camshaft Position Sensor G35;
$28.99

More parts for Infiniti I35

See all Infiniti I35 parts
Ignition Coil and Spark Plug Kit compatible with Infiniti I35, QX4FP-1CE84A
Fits 2 models
For Infiniti I35, QX4
Ignition Coil and Spark Plug Kit I35, QX4
$165.99

12 month warranty on every part

Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.

Warranty & returns policy

Customer reviews

No reviews yet

Bought this part? Be the first to share how it fit and how it held up.

Questions & answers

+Which models does this camshaft position sensor fit?

Our team verified it for Infiniti M35, Infiniti QX56, Infiniti FX35, Infiniti I35, Infiniti G35. The full list is in the compatibility table above.

+How do I make sure it fits my exact model?

Find the model number on your vehicle registration or VIN and compare it with the table above. Our fit guarantee covers verified models.

+Which side or position is it for?

Listed position: Camshaft. Check the side before ordering; left and right parts differ.

+What part numbers does it replace?

Listed reference numbers: 23731-AL61A, 237317Y000, PC461S, SU6480. Compare them with the number on your old camshaft position sensor.

+What is the camshaft position sensor made of?

Listed material: Plastic Black.

+Is it hard to install?

Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.

+How fast will it arrive?

US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.

+Is there a warranty?

Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.

$28.99
1