Blender Cutter Blade and Gasket Set compatible with Black and Decker BL500, BL1900, BL3900, BL4900, BL5000, BL9000
Key facts
- Part type
- Cutter Blade And Gaskets
- Included
- Set
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Black And Decker | Black and Decker BL3900 | Fits |
| Black and Decker BL500 | Fits | |
| Black and Decker BL5000 | Fits | |
| Black and Decker BL4900 | Fits | |
| Black and Decker BL9000 | Fits | |
| Black and Decker BL1900 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Black And Decker: Usually on the rating plate under the machine or behind the water tank.
General manufacturer guidance: exact label position can vary by model.
Cutter Blade And Gaskets specifications
- Material
- Stainless Steel, Rubber
- Replacement Part Numbers
- 14291600, 132812-07
- Includes
- 1 x Cutter Blade, 2 x Gaskets
Installation guide - Replacing a blade
General guidance for this part type - always follow your device manual- Cut resistant gloves
- Wrench or socket for bolted blades
- Never run the device without its guard or seal in place.
- Blender blades: check the rubber ring under the blade is seated, or the jar will leak.
- 1Switch off and unplug. Unplug the appliance or remove the battery; on petrol mowers disconnect the spark plug lead too.
- 2Remove the old blade. Wear gloves. Note which side faces up and the order of any washers, then undo the fixing. Mower blades: wedge a block of wood against the blade so it cannot turn.
- 3Check the new blade. Compare length, center hole and edge direction with the old blade before fitting.
- 4Fit and tighten. Fit the new blade the same side up with the washers in the same order, and tighten the fixing firmly.
- 5Reassemble and test. Refit guards or the jar seal and test briefly before regular use.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Water or coffee leaks around the seal
- 02Rubber is hard, cracked or flattened
- 03Loss of pressure or poor seal
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this cutter blade and gaskets fit?
Our team verified it for Black and Decker BL3900, Black and Decker BL500, Black and Decker BL5000, Black and Decker BL4900, Black and Decker BL9000, Black and Decker BL1900. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What's in the box?
Pack size: Set, as listed for this part. Check the photos and specifications for the exact contents.
+What is the cutter blade and gaskets made of?
Listed material: Stainless Steel, Rubber.
+Is it hard to install?
Install difficulty: Advanced · mechanical experience needed. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.