Activated Carbon Filter FY1413 compatible with Philips AC1214, AC1215, AC1217, AC2729
This activated carbon filter effectively removes harmful gases such as benzene, formaldehyde, and volatile organic compounds.
Key facts
- Part type
- Activated Carbon Filter
- Type
- Aftermarket replacement
Compatibility matrix
Only models verified by our team are listed| Parts for | Model | This part |
|---|---|---|
| Philips | Philips AC1215 | Fits |
| Philips AC2729 | Fits | |
| Philips AC1214 | Fits | |
| Philips AC1217 | Fits |
Only the models listed above have a confirmed catalog fit. If yours is absent, compatibility is unknown, not ruled out. Compare the exact model identifier and any published dimensions or connectors before ordering.
Where to find your model number
- Philips: Usually on a label on the housing or the filter head.
General manufacturer guidance: exact label position can vary by model.
Activated Carbon Filter specifications
- Filter Type
- Activated Carbon
- Compatibility Model
- AC2729, AC1214, AC1215, AC1217
Installation guide - Replacing a filter
General guidance for this part type - always follow your device manual- No tools required in most cases
- Do not wash a filter unless it is marked washable; wet HEPA media stops filtering.
- If the filter does not sit flush, stop and recheck the model on this page.
- 1Switch off and unplug. Power the device down and unplug it.
- 2Open the filter compartment. It is usually behind a front or back cover, or inside the dustbin on vacuums. Your manual shows the exact spot.
- 3Remove the old filter. Note how it sat, especially any airflow arrow or rubber seal facing the motor. Tap dust off into a bag outdoors.
- 4Fit the new filter. Take off all plastic wrap, seat it the same way round until it sits flush with its seal fully in contact, and never force it.
- 5Close and test. Close the cover, run the device and check for normal sound and airflow. Reset the filter reminder if your device has one.
This is general guidance for the part type, not a model-specific procedure. If the part does not fit without force, stop and recheck compatibility.
Maintenance check
Signs it's time to replace
- 01Suction or airflow is weaker
- 02Filter looks clogged, grey or damaged
- 03Unusual odors during use
12 month warranty on every part
Every part we sell is covered for 12 months from delivery. If it fails in normal use, we replace it or refund you , claim it straight from your order page.
Customer reviews
No reviews yet
Bought this part? Be the first to share how it fit and how it held up.
Questions & answers
+Which models does this activated carbon filter fit?
Our team verified it for Philips AC1215, Philips AC2729, Philips AC1214, Philips AC1217. The full list is in the compatibility table above.
+How do I make sure it fits my exact model?
Find the model number on your device label and compare it with the table above. Our fit guarantee covers verified models.
+What type of filter is it?
Listed filter type: Activated Carbon. Replace with the same type your device uses.
+Is it hard to install?
Install difficulty: Moderate · basic hand tools. Step by step instructions are on this page.
+How fast will it arrive?
US orders arrive in 7 to 15 business days with free shipping. Other countries are shown at checkout.
+Is there a warranty?
Yes, a 12-month warranty is included, and you can extend it at checkout. Returns are accepted within 30 days.